34. Remove the washer with any tool
(ex. tweezers). And remove the duplex gear.
35. Remove the 6 screws securing the
SHIELD-SMPS.
36. Remove the screw from the edge of
SHIELD-SMPS. And disassemble the
Holder-P-Damper and Damper-Pick Up.
Service Manual
Disassembly and Reassembly
Holder-P-Damper
Holder-P-Damper
3-16
Duplex gear
SHIELD-SMPS
SHIELD-SMPS
Damper-Pick Up
Damper-Pick Up