Philips Beolink 1000 User Manual page 2

Congratulations
With the interface module EXT from
www.oneremote.dk connected to your
DVD recorder and a Bang & Olufsen TV
you can operate the DVD with your Bang
& Olufsen remote control terminal.
This user guide tells you how.
Plug and Play
The TV-scart output on the receiver can
be connected directly to a vacant link
equipped AV socket on the Bang &
Olufsen TV with the special EXT scart
connection cable.
Connected in this way, the recorder can be
used with any Bang & Olufsen TV,
serving the TV with RGB signals and
audio through the same cable.
Following the correct programming of the
AV connection the receiver is ready to
operate. For programming of the AV
connection check the Bang & Olufsen TV
User Manual.
If the Bang & Olufsen TV does not have a
vacant useable AV socket a OneRemote
AV Selector can be supplied.
Bang & Olufsen remote controls
If connected correctly to your Bang &
Olufsen TV set, the DVD recorder can be
controlled through your TV set with either
Beolink 1000, 5000, 7000 or Beo4.
The Beo4 makes it more simple to use
your DVD recorder. That is why we
recommend the Beo4.
Operation in a Beolink video system
In a Bang & Olufsen Beolink video
system, where the main video- and/or
DVD player can be controlled through the
connected Bang & Olufsen TV sets, you
will get full control from all link rooms.
The DVD recorder is connected to a B&O
TV set as a V.MEM, V.Tape, DTV, SAT,
V.Aux or similar. If the TV set is part of a
link system, the DVD recorder is shown
and controlled like similar devices from
link rooms.
*B&O compatible means that the device can be
controlled with a Bang & Olufsen remote control
when connected to a Bang & Olufsen TV set.
Page 2
Using the B&O remote control
Due to the fact that the Beo4 does not
have as many buttons as the DVD
recorder remote, some of the buttons on
the Beo4 have more than one function.
To go to the alternative function of a
button you must press the O button.
O followed by
9
on a Beo4 is
similar to "Power" on the original remote
control.
In the overview to the right, you will see a
comparasion table for special button
combinations for the Beo4.
To achieve optimal control with a Beo4 it
is necessary to be familiar with the
original remote for the DVD recorder. The
functions and control sequences of the
DVD recorder remote control are found in
the DVD recorder user guide.
The DVD recorder is automatically turned
on when the desired AV input on the TV
set is chosen. This input can be V.MEM,
DTV, V.TAPE, DVD, SAT etc.
Page 3
Beo4 Function
OO
OK
oq
Info
oD
P+
oF
P-
oA
Play
oS
Back
e
Home
oe
Edit
oQ
Options
oW
Disc
oE
Rewind
oR
FF
o0
Select
o2
Live TV
o3
HDD List
o4
CAM
o5
Scart
o6
USB
o7
Audio
o8
Subtitle
o9
Power
r
Record
or
Timer