Page 1
INSTRUCTION MANUAL Cordless Driver Drill 6319D 6339D 6349D 005768 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
(tri-axial vector sum) determined according to EN60745: Work mode: drilling into metal For Model 6319D Vibration emission (a ) : 2.5 m/s or less ENG104-1 Uncertainty (K) : 1.5 m/s For European countries only Noise The typical A-weighted noise level determined according...
Power tool plugs must match the outlet. Never Makita Corporation responsible modify the plug in any way. Do not use any manufacturer declare that the following Makita adapter plugs with earthed (grounded) power machine(s): tools. Unmodified plugs and matching outlets will Designation of Machine: Cordless Driver Drill reduce risk of electric shock.
Page 4
When operating a power tool outdoors, use an before making any adjustments, changing extension cord suitable for outdoor use. Use of accessories, or storing power tools. Such a cord suitable for outdoor use reduces the risk of preventive safety measures reduce the risk of electric shock.
GEB001-4 If electrolyte gets into your eyes, rinse them out with clear water and seek medical SPECIFIC SAFETY RULES attention right away. It may result in loss of DO NOT let comfort or familiarity with product your eyesight. (gained from repeated use) replace strict adherence Always cover the battery terminals with the to drill safety rules.
FUNCTIONAL DESCRIPTION Reversing switch action 1. Reversing switch lever CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. Button 2.
First, slide the action mode change lever to the position CAUTION: symbol. Always set the speed change lever fully to the • The fastening torque is minimum when the number 1 is correct position. If you operate the tool with the aligned with the pointer, and maximum when the speed change lever positioned halfway between marking is aligned with the pointer.
When not using the driver bit, keep it in the bit holders. Nominal diameter of wood screw Recommended size of pilot hole Bits 45 mm long can be kept there. (mm) (mm) 2.0 - 2.2 1. Bit 2.2 - 2.5 2.
MAINTENANCE If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • CAUTION: Screw bits • Always be sure that the tool is switched off and the • Various type of Makita genuine batteries and •...
Page 12
Makita Corporation Anjo, Aichi, Japan 884559D229...