Panasonic KX-A406 Installation Manual page 27

1
Repeater: Connect the AC adaptor.
2
Base unit: Press and hold the Handset locator button for about 5 seconds.
R If all registered handsets start ringing, press the same button to stop. Then repeat this step.
R The next step must be completed within 90 seconds.
3
Repeater: Connect the AC adaptor to an AC outlet.
R When the repeater is turned on, the STATUS indicator and RSSI/ID indicator turn amber for about
2 seconds.
4
Repeater: Wait until the STATUS indicator and RSSI/ID indicator turn green. (The repeater is
ready for use.)
R If the indicators do not turn green, re-position the repeater in a place where the indicators turn
green.
5
Base unit: To exit registration mode, press the Handset locator button.
R The button depends on the base unit.
Note
R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during
use.)
R The repeater can support a maximum of 4 calls at a time.
R Do not use more than 2 repeaters at a time.
3. Linking to Digital Cordless Phones
27