Panasonic KX-TDA5480 Programming Manual page 25

Parameter & Description
Inter-Digit Time (s) 1-10s
*
Specifies the length of time (in seconds) within which
subsequent digits of a dial number must be dialed.
Generally, there is no need to change the default value.
* Digit End Code
Specifies the delimiter code to be used to signal the
end of a dial number.
Generally, there is no need to change the default value.
Others
Parameter & Description
Network CODEC of IP-PBX
The value of this parameter is set automatically as
appropriate to the setting of the PBX.
There is no need to change the value.
Default Value Range
5 1 to 10
# 0 to 9, #, *
Default Value Range
Not applicable G.711 Mu-Law,
G.711 A-Law
Programming Guide
2.2 Programming
25