Installing The 19" Chassis - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
2.7
System Hardware Manual
Figure 3-44 Secure the 9.5" Stand Mounting with Screws
5. Connect grounding wire to chassis. Refer to
Chassis on page 3-54
6. Refer to 2.8 Installing the 9.5" Chassis on page 3-54
installation of the chassis or, Chapter 6 paragraph
Extension or Trunk Blade on page 4-4

Installing the 19" Chassis

There are two types of chassis; the controlling (with the CD-CP00 installed)
and the expansion (that does not have the CCPU blade installed). As
discussed in other chapters, multiple chassis can be linked together to expand
the port size of the system.
for complete details on grounding the system.
for installation of blades.
Issue 4.1
2.8 Installing the 9.5"
to continue
2.2 Installing an
3 - 39