Pioneer CDJ-1000 Training Manual page 20

Communication Soft
• Windows standard Hyper-Terminal
• Tera Term, CCT Win etc.
[Setup ]
• Baud Rate : 4800bps
• Data Bits : 8bit
• Stop Bits : 1bit
• Parity : None
Communication Command
Command Name
TS Test Mode Entry
BK Address Block
TR Address Track
IX Address Index
TM Address Time
SA Start Up
PL Play
PA Pause
SE Search
RJ Reject
OP Open
EC Error Count
? A Address Request
? B Block Number Request
? I Index Number Request
? R Track Number Request
? T Time Code Request
? Q TOC Information Request
? E Error Rate Request
0TM All Servo Off
1TM LD On/Off
2TM Focus Servo On/Off
3TM Spindle On/Off
4TM Tracking Servo On/Off
6TM Address Read
9TM Disc Search
12TM Focus Position Adjust
13TM Tracking Balance Adjust
15TM Focus Gain Adjust
16TM Tracking Gain Adjust
SF Single Jump Fwd
SR Single Jump Rev
MF Multi Jump Fwd
MR Multi Jump Rev
NF Slider Move Fwd
NR Slider Move Rev
Note:
To enter Test mode, execute the TS command before inserting a disc. Otherwise, audio playback of the first piece of music
automatically starts responding to the command from the system-control microcomputer, and any command execution
afterwards will not be accepted. In this case, "OFF" is displayed when a command is execution.
To enter Test mode
(It checks coming to a personal computer on the contrary with OFF.
To make the block-address assignment
To make the track-address assignment
To make the index-address assignment
To make the time-address assignment
To turn all servos on, and wait paused at the innermost track
To trace the signals on the disc (but not audio playback))
To pause as soon as the command is received
To pause after searching for a given location
To turn all servos off and stop rotation of the disc
To eject the disc inside
To calculate the error rate
To return the address data (TNO:INDEX:AMIN:ASEC:AFRAME)
To return the block-number data (AMIN:ASEC:AFRAME)
To return the index-number data (TNO:INDEX)
To return the track-number data (TNO:INDEX)
To return the time-code data (AMIN:ASEC)
To return the TOC data (FTNO:ETNO:AMIN:ASEC:AFRAME)
To return the error-rate data (effective EC command
To turn all servos off
To turn on/off the laser-diode output (cyclic switching)
To turn on/off the focus servo (cyclic switching)
To turn on/off the spindle servo (cyclic switching)
To turn on/off the tracking servo (cyclic switching)
To start a synchronized operation and start reading out the address data
To collect the disc data necessary for judging if a disc is inserted and for the focus servo
To perform the focus-position adjustment
To perform the tracking-balance adjustment
To perform the focus-gain adjustment
To perform the tracking-gain adjustment
To jump by one track toward the outermost track
To jump by one track toward the innermost track
To jump by the assigned number of tracks toward the outermost track
To jump by the assigned number of tracks toward the innermost track
To move the slider about 1 mm toward the outermost track
To move the slider about 1 mm toward the innermost track
20
Description
execution)