External Equipment Connections; Antenna Connection - LG 15LC1R Series Owner's Manual

External Equipment Connections

External Equipment Connections

Antenna Connection

Antenna Connection
- For optimum picture quality, adjust antenna direction.
Connecting to an Inside Antenna Setup
- Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below.
(Use the correct type of antenna cable for the type of wall antenna jack.)
Apartment Buildings
- If you have a 75Ω round cable, insert the bronze wire and then tighten the connection nut. If you have
a 300Ω flat wire, connect the twisted wire to the antenna converter and then connect the converter to
the antenna jack on the TV.
- If using 75Ω round cable, do not bend the bronze wire. It may cause poor picture quality.
Connecting to an Outdoor Antenna Setup
- This type of antenna is commonly used in single family dwellings.
Single Family Home
- In poor signal areas, to get better picture qual-
ity, install a signal amplifier to the antenna as
shown to the right.
- If signal needs to be split for two TVs, use an
antenna signal splitter for connection.
75Ω Round Cable
300Ω Flat Wire
Wall Connection Jack
VHF Antenna
UHF
75Ω Round Cable
Antenna
300Ω Flat Wire
Turn clockwise to tighten.
Copper Wire
Antenna
Converter
Turn clockwise to tighten.
Copper Wire
Antenna
Converter
UHF
VHF
Signal
Amplifier
Installation
NPUT ANT IN ( 75 )
Antenna Jack
NPUT
ANT IN ( 75 )
Antenna Jack
PC INPUT ANT IN ( 75 )
13