External Equipment Connections - LG 200LC1R Owner's Manual

Installation
External EQuipment Connections Continued
Connect the audio/video output jacks on the
external A/V _uipment to the corresponding
input jacks on the TV. When connecting the
TV to external A/V equipment, match the jack
colors (Video = yellow, Audio Left = white,
and Audio Right = red)..
Viewing Setup
1. Turn on the external A/V equipment.
2. Use the INPUT button on the remote con-
trol to sel_t Video.
3. Operate the corresponding external quip-
ment. Refer to external equipment operat-
ing guide.
1. Connect the DVD video ou_uts to the COMPONENT (Y, PB, PR) jacks and connect the DVD audio
outputs to the AUDIO jacks.
2. If your DVD only has an SoVideo output jack, connect this to the S-ViDEO input on the TV and con-
n_t the DVD audio ou_uts to the AUDIO INPUT jacks on the TV.
NOTE: If your DVD player does not have component video output, use S-Video.
Viewing Setup
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT button on the remote control to select
3. Refer to the DVD player's manual for operating instruc-
tions. (If connected to SoVIDEO on rear panel, select the
Video external input source.)
• Component Input _rts
To get better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports
of the TV
DVD
Video output ports
of DVD player
_.._el RG_DTV
!5LC1 R* 480i/480p Yes Yes
20LC1 R* 480i/480p Yes No
14