Sony HDC3300R Operation Manual page 45

Menu page No. Item⁄
<AUTO IRIS> M05 AUTO IRIS
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
<MIC GAIN> M06 MIC1
(U15)
MIC2
<UP TALLY> M07 TALLY BRIGHTNESS
(U21)
NUMBER BRIGHTNESS
CAMERA NUMBER
NUMBER DISPLAY
<CALL/TALLY> M08 CCU CALL
CAM CALL
<OUTPUT FORMAT> M09 CURRENT
(U16)
ACTIVE LINE
<DOWN M10 OUTPUT SIGNAL
CONVERTER> (U19)
ASPECT
Default Settings
OFF ON, OFF, (ON), (OFF)
1 1, 2, 3, 4, 5, 6
- - –99 to 99, - -
0 –99 to 99
65 –99 to 99
0 –99 to 99
OFF ON, OFF
60 dB 20, 30, 40, 50, 60 dB
60 dB 20, 30, 40, 50, 60 dB
50 0 to 100
50 0 to 100
- - - -, 1 to 96
AUTO ON, OFF, AUTO
ON ON, OFF, - - -
OFF ON, OFF, - - -
JN4/SYL models:
1080-59.94i
CED/E33 models:
1080-50i
1080 1080, 720
JN4/SYL models: 1080: 59.94i, 50i, 59.94P,
59.94i 50P
CED/E33 models: 720: 59.94P, 50P
50i
MAIN MAIN, RET, VF
SQ SQ, EC
Remarks
Settings in ( ): When a remote
control unit/panel or a CCU
is not connected (cannot be
changed)
Select the auto iris windows:
1 2 3
4 5 6
The shaded parts indicate the
area where light detection
occurs.
To set the override to
temporarily change the
reference value for brightness
of the automatic iris level in the
range of ±2 steps:
–99: Two steps to fully closed
iris
99: Two steps to fully open iris
- - : OFF
The setting returns to " - - "
when the power is turned off.
±4 steps
Valid only in standalone
operation
AUTO: To correspond to the
UP TALLY switch setting of
HDLA attached
- - - : With no CCU connected
(cannot be changed)
Displays the current format.
The selectable frame settings
are displayed for the selected
ACTIVE LINE.
(Not displayed with CCU
connected)
Menu List
45