Advertisement
Connecting power supply for the Indoor Pet Unit
E
Fastening the cover for the Owner Unit
G
WARNING:
STRANGULATION HAZARD – In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 3 feet from the crib and out of their
reach. Never place camera or cords within a crib or near a bed. Secure the cord away from children's reach. Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
As with any electrical device, supervision of your pet's usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing, we strongly
recommend you keep this and all other electrical devices out of its reach.
• Connect the small plug of
the power adapter to the
pet unit and the other end
to the electrical outlet.
• Only use the enclosed
adapter (5.9V DC/
1000mA).
Small cross head or Flat
end screwdriver
Installing the battery pack for the Owner Unit
F
Black
Red
Connecting power supply for the Owner Unit
H
• Insert the wire tab of the
rechargeable battery
pack into the contact
slot as shown and fit the
battery pack into the
compartment.
• Connect the small plug of
the power adapter to the
owner unit and the other
end to the electrical
outlet.
• Only use the enclosed
adapter (6V DC/500mA).
Advertisement
