Advertisement
( && '
OSPF Area ID ? [0.0.0.0] 16.16.16.16
Hello Interval ? [10]
Dead Interval ? [40]
Cost ? [1]
Type ? (1=PtP, 2=BROADCAST, 3=NBMA, 4=PtMP) [2]
[5] Configure SNMP [No] ? y
Enter System Descriptor [LR3216_A] :
Enter System Contact [Nothing] :
Enter System Name [TEST Router] :
Enter System Location [7209] :
Add Manager [Yes] ?
Enter Manager IP address [0.0.0.0] 150.150.60.30
Community Name [public]
Access Right (1=READ Only, 2=WRITE Only, 3=READ/WRITE) [1]
Send TRAP to this manager [Yes]
Add Manager [Yes] ? n
[6] Change Prompt ? [No]
New Settings
~~~~~~~~~~~~
[1] Ethernet 1 port
IP routing is enabled
IP address is 150.150.60.244
IP netmask is 255.255.255.128
RIP send type is RIP1
RIP receive type is RIP1orRIP2
OSPF is Enabled
AREA ID is 16.16.16.16
Hello Interval is 10
Dead Interval is 40
Cost is 1
Port Type is Broadcast
[2] Ethernet port 2
IP routing is disabled
RIP send type is Unknown
RIP receive type is Unknown
OSPF is Disabled
[3] WAN1 1 port
Configured for PPP
IP routing is enabled
IP address is 100.1.1.100
Netmask is 255.255.0.0
Keep Alive Time is 3
RIP send type is RIP1
$
Advertisement
