OneClick Internet
This section contains the User Manual for the customized version of WebToGo's OneClick Internet for the Honeywell Thor
VM2.
OneClick Internet is installed by Honeywell on all Thor VM2s equipped with a WWAN radio. Available carriers and OneClick
features may vary by device.
OneClick Internet provides:
Internet connection management
l
Email download
l
SMS Management
l
Contact management for SIM and Microsoft Outlook
l
GPS Management
l
Since WebToGo OneClick Internet is preinstalled, it is present on the Windows Start Menu. A desktop icon is also provided.
Honeywell does not recommend using standby on the Thor VM2 while the WWAN connection is active. When exiting
standby, a delay of one minute or more may occur as the WWAN radio reads firmware files and initializes before
reconnecting. If this delay is acceptable to the user, standby may be enabled.
When the One Click Internet utility is displayed on screen and the Thor VM2 enters standby, the touch screen may
remain inactive for 10-15 seconds after the Thor VM2 resumes from standby.
Preparing for Initial Use on the Thor VM2
Install SIM Card
If using a CDMA carrier such as Verizon, skip this step because a SIM card is not used.
Install a SIM card
in the Thor VM2.
Load Firmware
While the OneClick Internet utility is preinstalled, it is necessary to load the GOBI radio firmware for your selected carrier such
as AT&T, T-Mobile or Verizon.
Note:
For carriers requiring a SIM card, the firmware may automatically be selected when a SIM card is installed in the Thor
VM2.
Double-tap the OneClick Internet icon on the Thor VM2 desktop.
Tap the Settings button and select the Firmware tab. Select the firmware for your carrier from the list and tap Change.
For more details, see
OneClick Internet Connection Manager
Activation
This step is only necessary for Verizon.
and the
Firmware
tab.
4-55