To Perform A Hard Reset; Calibrate The Device - LG PDA User Manual

To perform a hard reset

• A Hard Reset should only be performed after all other trouble shooting options have been exhausted.
After a hard reset, the device is restored to its default settings - the way it was when you first
purchased it and turned it on. Any programs you installed, data you entered, and settings you
customized on your device will be lost.
1. Power the device ON
2. Tap Start > Settings > System tab > Clear Storage.
3. Enter 1234 for the password twice.
4. Press Enter.
5. Select what to reset.
You have to enter your password and confirm again for hard reset. However when you forget your
password, the only way to hard reset the device is via the hard key sequence.
1. Power the device OFF.
2. Press and hold the following hard keys in sequence.
+ +
Keep pressing keys until your LCD screen turns on.
Align screen will appear if you success hard key reset.

Calibrate the Device

Calibrating the device screen involves tapping with the stylus the center
of a cross as it moves around the screen. This process ensures that
when you tap the screen with your stylus, the tapped item is activated.
If your device does not accurately respond to screen taps, follow these
steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, and follow the instructions
on the screen. After calibration is completed, Align screen reappears.
Click OK on upper right corner to return to setting mode.