Vcr Setup - LG 23LX1RV Owner's Manual

Installation
Installation
External Equipment Connections
External Equipment Connections
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
- Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen.
When connecting with an antenna cable
TV Back panel
1
When connecting with a RCA cable
TV Back panel
ANT IN
ANT OUT

VCR Setup

2
ANT IN
S-VIDEO
ANT OUT
OUT
(R) AUDIO (L) VIDEO
IN
VCR
1
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
VCR
Connect the RF antenna out socket of the VCR to
1
the Antenna socket on the set.
Connect the antenna cable to the RF antenna in
2
socket of the VCR.
Set VCR output switch to 3 or 4 and then tune TV
3
to the same channel number.
Insert a video tape into the VCR and press PLAY
4
on the VCR. (Refer to the VCR owner's manual.)
Connect the AUDIO/VIDEO jacks between TV
1
and VCR. Match the jack colors (Video = yellow,
Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY
2
on the VCR. (Refer to the VCR owner's manual.)
Select Video input source with using the TV/AV
3
button on the remote control.
• If you have a mono VCR, connect the audio cable
from the VCR to the AUDIO L/MONO jack of the set.
15