Copyboard Cover; Replacing The Copyboard Cover Sheet; Fans; Removing The Scanner Cooling Fan - Canon NP6330 Service Manual

C. Copyboard Cover

1. Replacing the Copyboard Cover Sheet

The copyboard cover sheet is attached to the copyboard cover by means of double-
sided tape, allowing you to remove it by simply pulling on its corners.
Be sure to press the entire surface of the sheet after attachment.
D. Fans

1. Removing the Scanner Cooling Fan

1) Remove the rear cover.
2) Disconnect the connector
3) Free the harness
4) Remove the four screws
2. Removing the Exhaust Fan
1) Remove the drum unit.
2) Remove the left cover and the inside left cover.
3) Remove the screw
inside the copier.
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
.
from the harness retainer.
, and remove the scanner cooling fan
Figure 7-411
, and disconnect the connector
Figure 7-412
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 CONTROLS AND EXTERNALS
.
; then, put the connector
7-15