Specifications; Hdcu3300R - Sony HDCU3300R Operation Manual

Specifications

HDCU3300R

General
Power supply 100/120/220-240 V AC, 50/60 Hz
(To change to a different power
supply, contact a Sony service or sales
representative.)
Current consumption
5.6 A (max.)
Peak inrush current
(1) Power ON, current probe method:
70 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
23A (230 V)
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Mass Approx. 16.8 kg (37 lb)
Dimensions
3
424(16 / )
4
3
465(18 / )
8
481(19)
Unit: mm (inches)
Input/Output connectors
CAMERA Optical fiber connector (1)
10.692 Gbps/10.681 Gbps SDI × 2, 240 V
AC power supply
INTERCOM/TALLY/PGM
D-sub 25-pin connector (1)
• INTERCOM (PD / ENG), 4W/RTS/
CC, 0 dB
• PGM, 2 systems, 0 dB/ –20 dB
• TALLY (R, G)
RCP/CNU 8-pin multi-connector (1)
TRUNK A 12-pin (1)
TRUNK LINE D-sub 9-pin, female (1)
RS-232C, for CHU transmission or
system expansion
I/O PORT D-sub 15-pin, female (1)
(JAE-made DA-C1-J10
recommended)
LAN 8-pin (1)
Input connectors
AC IN (1), 100, 110 to 120, 220 to 240 V AC
switchable
HD SERIAL RET INPUT
BNC-type (4), SMPTE-292M,
Bit rate: 1.485 Gbps/1.4835 Gbps
SD SERIAL RET INPUT
BNC-type (4), SMPTE-259M
Bit rate: 270 Mbps
REFERENCE INPUT
BNC-type (2), loop-through output
HD: SMPTE-274M, tri-level sync,
0.6 Vp-p, 75 ohms
SD: Black burst
(NTSC: 0.286 Vp-p, 75 ohms)
(PAL: 0.3 Vp-p, 75 ohms)
or NTSC 10F-BB
PROMPTER 1, 2 INPUT
BNC-type (2 for each), loop-through
output, analog signal, 1.0 Vp-p,
75 ohms
MIC REMOTE D-sub 15-pin (1)
(JAE-made DA-C1-J10
recommended)
Output connectors
MIC OUT XLR 3-pin, male (2), 0 dBs/–20 dBs
AES/EBU BNC-type (1), AES/EBU format
CHARACTER BNC-type (1), VBS, 1 Vp-p, 75 ohms,
character on/off switchable
WF REMOTE D-sub 15-pin, female (1) (JAE-made DA-
C1-J10 recommended)
SS-A OUT BNC-type (2)
HD-SDI: SMPTE 292M, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
23
Specifications