Panasonic QE-TS101AA Owner's Manual

„ Never use the product if damaged or if any problem, such as
„
deformation or damage due to dropping, is found.
„ Do not use the product if the cable of the wireless charging pad's
„
AC adapter is damaged.
„ Do not touch the product during a lightning storm.
„
„ Do not place heavy objects on the cable of the wireless charging
„
Owner's Manual
pad's AC adapter.
„ Do not use a voltage converter (travel adapter).
„
Wireless Charging Pad
„ Do not plug or unplug the wireless charging pad's AC adapter
„
with wet hands.
QE-TS101AA „ If the charging is not completed within the specified charging
„
Model No.
time, stop the charging process.
Wireless Charging Pad „ Use the specified power source and voltage. „
„ If you have an electrical device, such as an implanted cardiac „
pacemaker or an implanted cardioverter-defibrillator, consult
a physician before using this product. Radio waves from the
product could adversely affect the operation of electronic medical
devices.
Thank you for choosing Panasonic.
„ When inserting the power plug of the wireless charging pad's AC „
Before using the product, be sure to read this "Owner's manual" and follow
adapter into an electrical outlet, fully insert the plug.
the instructions to use the product correctly.
„ When using this product to charge a Qi-compatible device,
After reading the owner's manual, store it in a handy location for future refer- „
remove any covers.
ence.
„ Do not touch the connection terminals of the wireless charging
In addition, observe all warnings and cautions on the product. „
pad's AC adapter with your hands, fingers, or other parts of your
body.
QE-TS101AATR
„ Periodically wipe off any dust from the power plug.
S1113-0 „
„ Do not cover or wrap the product in a blanket or other bedding
„
Any phone or other device carrying the Qi logo will
during charging.
work with any charging surface that carries the Qi logo,
„ Remove the power plug from the electrical outlet before cleaning
regardless of manufacturer or brand. „
the product.
Qi and the Qi logo are the trademarks of the Wireless
„ Do not affix any metallic items, such as stickers or items that
„
Power Consortium (WPC).
contain metal, to the surface of the product or surface of the non-
slip cushions or to the battery cover, rear cover, or battery pack
Important Safety Instructions Please be sure to read of the Qi-compatible device.
„ Do not place any metallic items, such as straps or clips that contain „
metal, between the surface of the product or surface of the non-slip
Read these safety instructions carefully and completely. Not
cushions and the Qi-compatible device or battery pack.
doing so can lead to risk of fire, personal injury, electric shock
„ Do not allow any conductive object, such as metal parts or pencil „
and property damage.
lead, to contact, be inserted in, or short-circuit the connection
The cautions are classified as follows.
terminals of the wireless charging pad's AC adapter.
„ Do not use the wireless charging pad's AC adapter while the
„
WARNING alerts to a potentially hazardous
cable is still bundled.
Warning
situation. If not avoided it could result in
„ Chocking hazard. Non-slip cushions can pose a chocking hazard.
„
death or serious injury.
Keep them away from children that may play with them.
CAUTION alerts to a potentially hazardous
Caution situation. If not avoided it may result in minor
or moderate injury.
Caution
Safety Instructions on the Wireless Charging Pad
„ If the product will be used by children, the proper handling should
„
be explained by a parent or other adult to avoid dangerous
Failure to follow the following safety instructions can lead to fire, situations. In addition, closely supervise children to ensure that
they are using the product as intended. Injury or other problem
electrical shock, personal injury or property damage or damage
could result.
to this product.
„ Do not store the product in direct sunlight, such as in an „
automobile, etc., in a hot or extremely cold location, or in a
Warning location with high humidity or a large amount of dust.
„ Place the product on a flat, sturdy, level surface during charging. „
If the product is placed on an uneven or unstable surface, it could
„ Be sure your device is Qi-compatible. If a non-Qi-compatible
„
fall, resulting in damage. In addition, do not cover or wrap the
device is used, it may overheat and rupture.
product in a cloth, blanket, or other bedding.
„ Do not disassemble the wireless charging pad or AC adapter. „
„ If any abnormality, such as smoke, unusual odor or noise, or
„
„ Connect AC adapter only to a power source that has a voltage of „
excessive heat, is noticed during use, or if the product was
AC 100 V to AC 240 V.
dropped, became wet, or is damaged, immediately unplug the
„ Be sure to unplug the AC adapter from the electrical outlet before
„ product from the power source and contact the service.
cleaning this product.
„ Overheating may occur if foreign objects are put on the charge
„
„ Do not throw the product into a fire. „
pad and the non-slip cushions. Do not put any foreign object on
„ Do not use or leave this product in a hot location (near a fire or „ the charging pad and the non-slip cushions.
other heat sources, in the hot sun, and so on) or in a location
where flammable gas is produced.
„ Do not charge a device using procedures other than as specified.
„
„ Do not disassemble, modify, repair, or solder the product. Our
„ Precautions for Use
company is not responsible for any problems resulting from such
actions.
z Avoid locations with extremely high temperatures, low temperatures,
„
„ Do not allow water or other liquid to contact the product. Never
„
or high humidity. Use the product in a location with an ambient
use outdoors, with wet hands, or in a location where water, pet
temperature of 41°F (5°C) - 95°F (35°C) and an ambient humidity
urine, or other liquid may contact the product. If the product
of 45% - 85%. If it is determined through an investigation that the
becomes wet, immediately unplug it from the power source and
product malfunctioned as a result of use in an environment with an
stop using it.
extreme temperature or high humidity, the malfunction will not be
„ Do not place the product in a cooking appliance, such as a
„ covered by the warranty and the product will not be repaired.
microwave oven, or the like.
z Do not use the product in a location with excessive dust or vibration.
„
„ Do not drop or throw the product, or subject it to strong shocks. „
z Periodically clean the connection terminals and other portions of
„
„ Keep out of the reach of children. Accidents, such as choking „ this product using a dry cotton swab, and so on. Dirty connection
from mistakenly swallowing small parts, or injury could result.
terminals could cause poor connections. In addition, do not apply
1 2
a strong force when cleaning the product. Otherwise, the terminals
Charging
could be deformed.
z Discoloration may occur due to the user's usage conditions or
„ 1.
environment.
Insert the power plug of the wireless charging
z If the product is dirty, wipe it clean using a soft, dry cloth. Do not
„ pad's AC adapter into an electrical outlet.
use benzene, paint thinner, alcohol, cleaning agent, or similar
2.
substances. Otherwise, the exterior or characters could be affected.
Insert the DC connector of the wireless charging
z When using the product, keep it as far away as possible from fixed-
„ pad's AC adapter into the DC input jack of the
line telephones, televisions, radios, and similar devices. Otherwise,
wireless charging pad.
the devices could be adversely affected.
z If a Qi-compatible device is used to make a telephone call or
„
communicate while it is being charged by this product, poor Wireless
reception could result. Charging Pad
z This product may become warm during charging, but this is not a
„
malfunction.
z Before charging, carefully read the user's manual of the Qi-
„
compatible device.
DC input jack
z Do not place a Qi-compatible device on this product while the
„ (connection terminal)
device is connected to a charging adapter (including micro-USB
adapters) or micro-USB cables for computers.
z Although a Qi-compatible device can be charged while the power
„
is turned on and the device is in standby mode, the charging time
DC connector (connection terminal)
may be longer.
LED indicators
z Do not place magnetic cards or similar items near this product. The
„ 3.
magnetic data could be deleted.
Place the Qi-compatible device on the wireless
z Do not place magnetized items near this product. Strong
„ charging pad, making sure to position the
magnetism near the product could cause it to malfunction.
specified charging area* of the device at the center
z The wireless charging pad's AC adapter is compatible with voltages
„
of the wireless charging pad. Charging starts
from AC 100 V to AC 240 V.
when the LED indicators illuminate in blue.
z However, the plug shape is for a voltage of AC 120 V (UL
„
standards). When using the product overseas, a plug adapter that * For the specified charging area of a Qi-
is suitable for the travel destination is required. However, do not
compatible device, refer to the user's
use a voltage converter (travel adapter) for charging.
manual of the device.
z Do not use a device or AC adapter other than the specified devices „
z If the Qi-compatible device is not
„
with this product.
recognized, slide the device back and forth
z When charging a Qi-compatible device, remove any covers, films,
„ until it is positioned in a location where the
stickers, and so on, from the device.
LED indicators come on in blue.
z Place the product on a sturdy, level surface during charging.
„
z If the LED indicators come on in orange,
„
z During charging, do not move this product or the Qi-compatible LED Indicator
„
the Qi-compatible device is positioned
device.
outside of the charging area. The orange indicators become brighter
If the Qi-compatible device is accidentally moved during charging,
as the device is moved closer to the charging area and become blue
remove the device from the product, wait approximately 15
when the device is in the charging area.
seconds, and then position the device on the wireless charging pad
4.
in a location where the LED indicators come on in blue. When charging is complete, the LED indicators go off.
z When charging a Qi-compatible device that is equipped with a
„
z The product will start charging the Qi-compatible device again in
„
vibrating function, turn off the vibrating function. If the Qi-compatible
approximately 1 hour after completion of charging if it is left as is, but
device vibrates and moves, charging may not be completed or the
it is normal.
device could fall.
5.
Remove the Qi-compatible device from the
z Multiple Qi-compatible devices cannot be charged at the same „
time. wireless charging pad.
z When using this product to charge a Qi-compatible device, keep
„
z To charge another Qi-compatible device, wait approximately 15
„
all other devices that can be charged wirelessly at least 11-4/5
seconds after the LED indicators go off before starting to charge
in (30cm) away. Otherwise, the Qi-compatible device may not be
the next device. If you do not wait 15 seconds, the device may
detected correctly and cannot be charged.
not be charged correctly.
z Do not affix stickers to this product or cover it with a cloth.
„
Otherwise, the Qi-compatible device may not be detected correctly
and cannot be charged. Using Non-Slip Cushions
Attach the non-slip cushions to the charge pad as shown to
prevent the device you are charging from slipping off the pad.
Included Items
: Position to attach non-slip cushions
<QE-TS101AA>
Owner's Manual
Wireless Charging Pad
QE-TS101AA
Model No.
Wireless Charging Pad
Non-Slip Cushions
z Please make sure that the foreign object such as dust or any
Before using the product, be sure to read this "Owner's manual" and follow Thank you for choosing Panasonic. „
the instructions to use the product correctly.
After reading the owner's manual, store it in a handy location for future refer-
ence. metal object is not on the charging pad when you attach the non-
In addition, observe all warnings and cautions on the product.
QE-TS101AATR slip cushions.
S1113-0
work with any charging surface that carries the Qi logo, Any phone or other device carrying the Qi logo will
regardless of manufacturer or brand.
Qi and the Qi logo are the trademarks of the Wireless z Abnormal charge may cause the fire, burn or injury in case that „
Power Consortium (WPC).
Important Safety Instructions Please be sure to read there is foreign object on the charging pad and the non-slip
Read these safety instructions carefully and completely. Not
cushions.
and property damage.
Wireless Charging Pad
Owner's Manual
<QE-AP105AA>
Non-Slip Cushions
AC Adapter
3 4
LED Indicator
Symptoms Causes
Indication Color State
The temperature of the
charging location is too high
Come on, and then dim after
Blue Charging Charging time is or too low.
approx. 10 seconds
long (compared
Charging is complete (or Qi-
to the charging
Go off -
compatible device is not recognized)
time for other
Qi-compatible
Qi-compatible device is being The Qi-compatible device is
Come on* Orange
devices when
recognized (outside of charging area) being used during charging.
Power plug using this
(connection Flash quickly wireless charging
Blue Charging error or malfunction
terminal) (at approx. 0.2-second intervals) pad)
The Qi-compatible device
Flash slowly (come on for was moved from the location
Temperature of Qi-compatible
AC Adapter
approx. 2 seconds, and then go Blue where the LED indicators
device is too high or too low
off for approx. 1 second) came on in blue.
* If the orange indicators do not become blue, or if the LED indicators flash quickly
Charging stops
in blue (at approximately 0.2-second intervals), the Qi-compatible device is not
before being
recognized. Slide the Qi-compatible device back and forth and to the left and right
The Qi-compatible device
completed
until it is positioned in a location where the LED indicators come on in blue. was moved during charging.
(wireless
If the LED indicators come on in orange, and then go off after approximately 3 sec-
charging pad)
onds, the wireless charging pad is reacting to a metal portion of the Qi-compatible
device. Slide the Qi-compatible device back and forth and to the left and right until Charging is not
it is positioned in a location where the LED indicators come on in blue. completed
(with the Qi-
compatible This is a specification.
device fully
Troubleshooting
charged or totally
discharged)
Check the items of the table below.
Charging of
the product
Symptoms Causes Corrective actions is already
The Qi-compatible device is
complete, but the
You are not using the on (powered on, display on,
Qi-compatible
Use the included AC adapter.
application started, etc.).
specified AC adapter. device is not fully
charged or totally
The power plug and
Fully insert the power plug and discharged
connector of the AC adapter
connector.
are not inserted completely. * Some Qi-compatible devices may not allow the product to detect a fully charged
state (because of not transmitting the corresponding signal). In this case, the prod-
There is a foreign object
between the wireless uct's LED indicators are continuously on in blue to indicate a fully charged state,
Remove the foreign object.
charging pad and the Qi- but it is normal. For the impact of charging continuously in this state on the Qi-
compatible device.
compatible device, contact the device manufacturer.
Cannot charge
The charging of the Qi- The charging is already complete.
(LED indicators
compatible device is You can remove and use the
do not come on)
complete or nearly complete. device. Specifications
Slide the Qi-compatible device
back and forth and to the left
The Qi-compatible device is Wireless Charging Pad
and right until it is positioned in a
not recognized correctly.
location where the LED indicators
Model QE-TS101AA
come on in blue.
Input DC 12 V 650 mA
Refer to the owner's manual of
The Qi-compatible device is Output Max. 5 W
the Qi-compatible device and
not positioned in the correct
position the device in the correct
direction. Approx. Ф 3-5/8 in
direction. Dimensions
(93 mm) × 5/8 in (16 mm)
If the condition does not change
when you use the included AC
Cable length -
You are not using the adapter, remove the power plug
Weight Approx. 3 oz (85 g)
specified AC adapter. from the electrical outlet, wait a
few seconds, and then insert the
Operating
plug back into the outlet. 41°F (5°C) - 95°F (35°C)
temperature
There is a foreign object
Cannot charge Operating
between the wireless
(LED indicators Remove the foreign object.
humidity
charging pad and the Qi-
flash quickly in
compatible device.
blue) z Due to product improvements, the specifications and external
„
appearance are subject to change without notice.
Remove the Qi-compatible
device, wait until the LED
indicators go off, and then
The Qi-compatible device is
UL Wording
position the device on the
not recognized correctly.
wireless charging pad in a
location where the LED indicators
IMPORTANT SAFETY INSTRUCTIONS-Save These
come on in blue.
Instructions
Slide the Qi-compatible device
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
The Qi-compatible device is back and forth and to the left
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
not positioned in the charging and right until it is positioned in a
Cannot charge area. location where the LED indicators
(LED indicators come on in blue. Caution
come on in
Risk of injury. Risk of electric shock and fire.
There is a foreign object
orange)
between the wireless For indoor use only. Dry location use only.
Remove the foreign object.
charging pad and the Qi-
For connection to a supply not in the U.S.A., use an attachment
compatible device.
plug adapter of the proper configuration for the power outlet, if
Cannot charge Leave the Qi-compatible device in a needed.
The temperature of the Qi-
(LED indicators location with a temperature of 41°F
compatible device is too high
flash slowly in (5°C) - 95°F (35°C) for a while, and
or too low.
blue) then charge the device.
5 6
Limited Warranty Limits And Exclusions
FCC Wording
Corrective actions
This warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty
Charge the device in a location
z This device complies with Part 15 and 18 of the FCC Rules.
that is at room temperature. „ ALSO DOES NOT COVER damages which occurred in shipment, or failures which
However, the charging time may Operation is subject to the following two conditions: are caused by products not supplied by the warrantor, or failures which result from
be long depending on the type (1) This device may not cause harmful interference, and accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
of Qi-compatible device even installation, set-up adjustments, misadjustment of consumer controls, improper
(2) this device must accept any interference received, including
if the temperature is within the maintenance, power line surge, lightning damage, modification, introduction of sand,
interference that may cause undesired operation.
operating temperature range. humidity or liquids, commercial use such as hotel, office, restaurant, or other business
or rental use of the product, or service by anyone other than a Factory Service Center
If the Qi-compatible device Responsible Party: Panasonic Corporation of North America Two
or other Authorized Servicer, or damage that is attributable to acts of God.
is used during charging, the Riverfront Plaza Newark, NJ 07102-5490
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
charging time may become
Support Contact: Panasonic Consumer Electronics Company "LIMITED WARRANTY COVERAGE".
longer.
Telephone No.:1-201-348-7000 THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING
Remove the Qi-compatible device, wait Note:
OUT OF ANY BREACH OF THIS WARRANTY.
approximately 15 seconds, and then This equipment generates, uses, and can radiate radio frequency
(As examples, this excludes damages for lost time, travel to and from the servicer,
position the device on the wireless
energy and, if not installed and used in accordance with the
charging pad in a location where the loss of or damage to media or images, data or other memory or recorded content.
instructions, may cause harmful interference to radio communications.
The items listed are not exclusive, but for illustration only.)
LED indicators come on in blue.
However, there is no guarantee that interference will not occur in a
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
Remove the Qi-compatible particular installation.
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
device, wait approximately 15
If this equipment does cause harmful interference to radio or television WARRANTY.
seconds, and then position the reception, which can be determined by turning the equipment off and Some states do not allow the exclusion or limitation of incidental or consequential
device on the wireless charging on, the user is encouraged to try to correct the interference by one or damages, or limitations on how long an implied warranty lasts, so the exclusions
pad in a location where the LED may not apply to you.
more of the following measures:
indicators come on in blue. This warranty gives you specific legal rights and you may also have other rights
• Reorient or relocate the receiving antenna
which vary from state to state. If a problem with this product develops during or
• Increase the separation between the equipment and receiver.
after the warranty period, you may contact your dealer or Service Center. If the
• Connect the equipment into an outlet on a circuit different from that
problem is not handled to your satisfaction, then write to the warrantor's Consumer
It is normal. to which the receiver in connected. Affairs Department at the addresses listed for the warrantor.
Refer to the note (*) below. • Consult the dealer or an experienced radio/TV technician for help.
PARTS AND SERIVCE, WHICH ARE NOT COVERED BY THIS LIMITED
This product may cause interference to radio equipment and should WARRANTY, ARE YOUR RESPONSIBILITY.
not be installed near maritime safety communications equipment
or other critical navigation or communication equipment operating
Customer Services Directory (United States and Puerto Rico)
between 0.45-30 MHz.
The Qi-compatible device will
Obtain Product Information and Operating Assistance; locate
not be fully charged if the Qi-
compatible device is on (powered ICES Wording your nearest Dealer or Service Center; purchase Parts and
on, display on, application started,
Accessories; or make Customer Service and Literature
etc.).
z This ISM device complies with Canadian ICES-001 and ICES-003.
„ requests by visiting our Web Site at:
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
http://www.panasonic.com/help
CANICES-3(B)/NMB-3(B)
or, contact us via the web at:
http://www.panasonic.com/contactinfo
Energy Regulation Wording
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
This AC Adapter (QE-AP105AA) is compliance
with the level V performance requirements under
the International Efficiency Marking Protocol.
Accessory Purchases (United States and Puerto Rico)
AC Adapter Purchase Parts, Accessories and Owner's Manual online for
Panasonic Products Limited Warranty all Panasonic Products by visiting our Web Site at:
QE-AP105AA
http://www.pstc.panasonic.com
AC 100-240 V 50-60Hz 0.21 A
Limited Warranty Coverage (For USA and Puerto Rico Only) Or, send your request by E-mail to:
DC 12 V 650 mA
If your product does not work properly because of a defect in materials or
npcparts@us.panasonic.com
workmanship, Panasonic Corporation of North America (referred to as "the
Approx. 2-3/4 in (70.5 mm) × 1-1/4 in
warrantor") will, for the length of the period indicated on the chart below, which You may also contact us directly at:
(30.5 mm) × 1-3/4 in (45 mm)
starts with the date of original purchase ("warranty period"), at its option either
(excluding protrusions and cable) 1-800-237-9080 (Fax Only)
(a) repair your product with new or refurbished parts, (b) replace it with a new or
(Monday-Friday 9am-9pm EST)
Approx. 77-1/2 in (197 cm) a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by the warrantor. Panasonic National Parts Center
Approx. 4-3/8 oz (125 g)
20421 84th Avenue South, Kent, WA 98032
Product or Part Name Parts Labor
(We accept Visa, MasterCard, Discover Card, and American
Wireless Charging Pad 1 year Not Applicable
Express.)
During the "Labor" warranty period there will be no charge for labor. During the
45% - 85%
"Parts" warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for incorporated rechargeable Li-ion batteries and
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold "as is".
Mail-In Service --Online
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair.
When shipping the unit, carefully pack, include all accessories, and send it prepaid,
adequately insured and preferably in the original carton. When shipping Lithium
Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling
as Panasonic is committed to providing the most up to date information. Include
a letter detailing the complaint, a return address and provide a daytime phone
number where you can be reached. A valid registered receipt is required under the
Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER
WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF
PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
7
As of Aug/2013
8