System Menu Option 11, Unbypass Zone - GE AL-1103 User Manual

40 Alliance System
User Manual

System menu option 11, Unbypass zone

Use this menu to unbypass zones and include them in the security system. Do not unbypass a zone before
checking the circumstances, as unbypassing an active zone might cause an alarm.
Unbypass a zone
To unbypass a zone, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER
(Figure 1).
2. Enter 11 (for menu 10) and press ENTER.
3. The display that appears depends on the
status of the zones.
3a. If no zones are bypassed the display
shows all zones are normal (Figure 42).
3b. If the zones are unbypassed the display
shows either a list of zones or one at a
time (Figure 43) or as a list of zone
numbers (Figure 44).
4. Press ENTER to exit menu 11.
Table 21 lists the unbypassed zone display options.
Table 21. Unbypassed zone options
Option
Unbypass the selected zone. This removes the zone from the display
and replaces it with the next bypassed zone in the list.
Update the list of bypassed zones and display the next zone on the
list (if any).
Exit menu 11.
Exit the menu option and return to the original display.
Figure 42. All zones are bypassed
All Zones are Unbypassed
Unbypass:
Figure 43. Bypassed zones listed one at a time
Bypassed On 4, Front Door Contact
Unbypass:
Figure 44. Bypassed zones listed by number
Bypass On 1, 3, 4, 5
Unbypass:
Action
Enter the zone number and press ENTER.
Press ON/NEXT.
Press ENTER.
Press CLEAR.