INSTRUCTION MANUAL SC-N525T VACUUM CLEANER HOUSEHOLD USE ONLY...
Page 2
NAME AND FUNCTION OF PARTS (Assemble as indicated in the center illustration.) / Extension Pipe/ Dust Indicator / Cord Rewind Button / Vacuum Power Adjustment Ring / Switch / The pipe is adjustable according to th height of the user. The dust indicator shows the amount of dust that has been The full vacuum power of the cleaner may be too Press the ON side of the switch...
DUST DISPOSAL / After press the OFF side of the switch, d isconnect th e h ose and proceed as follows: Clamp button Push the clamp button. Knob 2. Pull up the knob and shake. Filter Shake the knob by turning it si deways about 20 times.
Thank you for your purchase of the Sanyo Vacuum Cleaner. Please read these instructions carefully before using. A FEW PRECAUTIONS 1. Operation without the dust compartment and /or filters in place will allow dust to enter the motor and could damage the vacuum cleaner.
Page 6
HOW TO USE THE HOSE STAND / The vacuum cleaner with the floor nozzle, extension pipe and hose can be stored while still connected. Stand the vacuum cleaner up and Hold here insert the pipe holder into the pipe-holder hole. Wind 2 Hold the hose and wind it around...
Edge grabber CARE AND MAINTENANCE If you have a problem with your vacuum cleaner, consult the handy guide below. If the vacuum cleaner is malfunctioning, do not operate it. Contact your dealer or the nearest Sanyo Service Center. Problem Possible cause Possible solution 1.
Page 8
SANYO Electric Co., Ltd. 9BF-D-P111-01319 0704- OSAKA, JAPAN E/CHN...