Panasonic CF-U1 series Operating Instructions Manual page 40

Troubleshooting (Basic)
n Starting Up
Cannot resume.
Other startup
problems.
40
l An error may occur when the computer automatically enters the
( ) sleep / (
tion mode while the screensaver is active. In this case, turn off
the screensaver or change the pattern of the screensaver.
l If you press and hold the power switch for 4 seconds or
longer, the power will be turned off forcibly and the computer
will not resume. In this case, all unsaved data will be lost.
l You disconnected the AC adaptor and the battery pack while the
computer was in (
standby. If the computer's power supply is disconnected in
( ) sleep / (
data will be lost and the computer will not resume.
l The battery is exhausted. (
(
l Press + (F9) in the Setup Utility (è
Manual "Setup Utility") to return the Setup Utility set-
tings (excluding the passwords) to the default values.
Start the Setup Utility and make the settings again.
l Remove all peripheral devices.
l Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
B Click (Start) - [Computer] and right-click [Local
Disk (C:)], and click [Properties].
C Click [Tools] - [Check Now].
Ÿ A standard user needs to enter an administrator password.
D Select the option in [Check disk options] and click [Start].
E Click [Schedule disk check] and restart the computer.
A Click [start] - [My Computer] and right-click [Local
Disk(C:)], and click [Properties].
B Click [Tools] - [Check Now].
C Select the option in [Check disk options] and click [Start].
l Start the computer in Safe Mode and check the error details.
When the [Panasonic] boot screen disappears
and hold +
Menu is displayed. Select the Safe Mode and press
*1
When [Password on boot] is set to [Enabled] in the [Security]
menu of the Setup Utility, [Enter Password] appears after the
[Panasonic] boot screen disappears. As soon as you enter the
password and press
) sleep / (
) standby and hibernation consume some power.
(F8) until the Windows Advanced Options
(Enter), press and hold
) standby or hiberna-
)
) standby, unsaved
) sleep /
Reference
at startup, press
*1
(Enter).
+ (F8).