Playback On Monitor 2; Monitor 2 Display Setup - Sanyo MPX-CD16P Instruction Manual

CAMERA SCREEN DISPLAY CONTROL

Playback on Monitor 2

1
Press the SEQUENCE button
The image on monitor 1 will be displayed full screen sequentially. The MULTI indicator will
go off.
2
Press the PLUS1 button
The PLUS1 indicator will flash, and the SEQUENCE indicator will go off. The image from
camera 1 will be displayed automatically and the same image as viewed on monitor 1 will be
viewed on monitor 2.
NOTE:
When there is no image displayed on monitor 2, while the PLUS1 indicator is flashing, press
a camera SELECT button corresponding to a terminal where a camera has been connected.

Monitor 2 Display Setup

Press the camera SELECT button corresponding to the desired camera. The same
image as viewed on monitor 1 will be viewed on monitor 2. This completes the
setup.
(1) Sequential Full Screen Display
Press the SEQUENCE button to start sequential display on monitor 1 and monitor 2.
The sequence timing is set in menu "4. DISPLAY SET", for more information,
please refer to page 11.
(2) To display on monitor 2 the same image as on monitor 1
In menu "4. DISPLAY SET", the item MONITOR2 ← MONITOR1 to "Y" (Yes).
What is displayed on monitor 1 will also be displayed on monitor 2. While setting up
the menus on monitor 1, you can confirm the sequence timing, the clock, the title,
etc. on monitor 2.
To return to camera live picture viewing, press the PLUS1 button.
18
Monitor 2 Monitor 1
Monitor 2
English