D-Link DNS-320L User Manual page 63

Section 4 - Configuration
The D-Link Storage Utility will open. Make sure you are connected to your lo-
cal LAN, then click the Refresh button. The D-Link Storage Utility will find the
D-Link DNS-320L.
Click Configuration to open the web-based configuration utility using your
computer's default web browser.
Use the drop-down list to enable or disable Receive DHCP. If this is disabled,
you will be able to manually configure your LAN settings. Click Apply to save
the current configuration.
To map a NAS volume, select a Volume from the list then click the Connect
button.
D-Link ShareCenter DNS-320L User Manual 57