Configure Llrp; Version Information - Motorola MC3090Z User Manual

Configure LLRP

LLRP is in Server Mode by default. To configure LLRP to operate in Client Mode:
Tap the LLRP icon, then tap
1.
LLRP Configuration Window
Figure 3-10
Select the
2. Client Mode
In the field, enter the port number on which the server waits for the LLRP client to communicate. The
3. LLRP Port
default is 5084.
In the field, enter the server IP for the remote host to which LLRP communicates as a client.
4. Server IP
Tap .
5. Apply
Tap to close the window.
6. ok

Version Information

To view software version information for the LLRP application, tap the LLRP icon, then tap
LLRP Versions Window
Figure 3-11
This window displays the LLRP server application version, RFID library version, radio firmware version, and radio
OEM data version.
NOTE The version information in
screen. Also, downloading data using LLRP scripts or the RFID_FLASH application updates the version
information.
.
Configure LLRP
check box.
Figure 3-11 may differ from the information on the actual mobile computer
LLRP Functionality 3 - 7
.
Version Info