Installation Instructions Important notes S Safety in use is only guaranteed if the technical installation of the hob has been carried out correctly and in accordance with the installation instructions. The installation technician shall be liable for any damage caused as a result of incorrect installation. S Only an authorised technician is able to connect the appliance.
Safety information Hot cooking hob Risk of burns! Do not touch the hot areas of the hob. It is imperative that children keep away from the appliance. The residual heat indicator tells you if the Read these instructions carefully. Only after doing this hotplates are hot.
Warning: This appliance complies with current Discolouration Unsuitable cleaning Use only cleaning safety regulations and electromagnetic compatibility agents agents which are suitable for ceramic. regulations. Nevertheless, people with a pacemaker should not use Pan abrasion Lift the pots and pans this appliance.
Pan detection Induction cooking Each hotplate has a minimum limit for pan detection which varies according to the material from which the pan being used is made. It is for this reason that you are Advantages of induction cooking recommended to use a hotplate which matches the diameter of the pan.
Residual heat warning light Warning: The selected heat setting will flash if no pan is placed on the induction hotplate. The hob has a residual heat warning light for each After a certain time, the hotplate switches off. hotplate to show those which are still hot. Avoid touching the hotplate when this warning light is on.
Press the + or - symbol for the time program Automatic time limit function.The basic settings are displayed. + symbol: 30 minutes - symbol:10 minutes If a hotplate is in use for a long time without the setting being changed, the automatic time limit is activated. Set the required time using the + or - symbol.
Only use warm water with a little soap Never use sharp or abrasive products Do not use the glass scraper Normal noises heard during appliance operation Selecting another setting Press the Ñ symbol until the indicator for the Induction heating technology is based on the creation of required function is displayed.
Fixing malfunctions Malfunctions are generally caused by minor faults. Before contacting Technical assistance, ensure you have read the following recommendations and warnings. Display Malfunction Measure none The electric power supply Use other electrical appliances to check if there has been has been interrupted.