Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 3000 Operating Instructions Manual

Call Forwarding

Step by Step
:
or
34
Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system).
C
Lift the handset.
F:
Enter the code.
; <
or Enter the line type you wish to use:
1 = all calls, 2 = external calls only, 3 = internal calls
only
D L
Enter the destination number (without the external
code).
Deactivating call forwarding:
C
Lift the handset.
G: L
Enter the code.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 54!
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact the service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.