Advertisement
When an error is displayed in the
setup program
When the setup program started ,
Error Window was displayed.
Click the OK button without selecting any printer
Cause:
driver.
Measure: Select the printer driver to install and click the OK
button.
The folder path exceeds the specified number of
Cause:
characters.
Measure: Move the folder path of the Fujitsu DL Series
Software Setup program to the place where
the number of characters is 100 or less.
The setup information file required for the
Cause:
installation cannot be found.
(1) The setup information file may not be
present.
(2) The setup information file may be destroyed.
Measure: (1) Run the Fujitsu DL Series Software Setup
program again.
(2) Obtain the latest printer driver from Support
& Downloads of the Fujitsu Isotec web site.
http://jp.fujitsu.com/group/fit/en/
** The above address was the URL at the
time when this manual was written.
Copyright © 2010 FUJITSU ISOTEC LIMITED
20 / 24
Alert Window or
All rights reserved.
Advertisement
