1. Manuals
  2. Brands
  3. LG Manuals
  4. TV Receiver
  5. LST-5600A
  6. Service manual

LG LST-5600A Service Manual

Hd integrator box system
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD Integrator Box
System
SERVICE MANUAL
MODEL : LST-5600A
CAUTION
BEFORE SERVICING THE UNIT, READ THE "SAFETY PRECAUTIONS"
IN THIS MANUAL.

Advertisement

Table of Contents
loading

Related Manuals for LG LST-5600A

Summary of Contents for LG LST-5600A

  • Page 1 HD Integrator Box System SERVICE MANUAL MODEL : LST-5600A CAUTION BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL.
  • Page 2 SECTION 1 SUMMARY CONTENTS INTRODUCTION ......................1-2 PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS....1-3 SERVICING PRECAUTIONS..................1-4 SPECIFICATIONS .....................1-5...

  • Page 3: Introduction

    INTRODUCTION - Digital/Analog broadcasting recorder/receiver [HD/SD PERSONAL VIDEO RECORDER & RECEIVER] or PVR(Personal Video Recorder)-STB(Set-Top Box) receives the ground wave HD Digital broadcasting pro- gram /Analog NTSC or Cable broadcasting program and saves a video and audio signal at a HDD with a specific form or offers additional related services..

  • Page 4: Product Safety Servicing Guidelines For Video Products

    When servicing this product, under no circumstances should the original design be modified or altered without permission from LG Electronics Corporation. All components should be replaced only with types identical to those in the original circuit and their physical location, wiring and lead dress must conform to original layout upon completion of repairs.

  • Page 5: Servicing Precautions

    SERVICING PRECAUTIONS CAUTION: Before servicing the HD/SD PERSONAL VIDEO Electrostatically Sensitive (ES) Devices RECORDER & RECEIVER WITH GEMSTAR covered by Some semiconductor (solid state) devices can be damaged this service data and its supplements and addends, read and easily by static electricity. Such components commonly are follow the SAFETY PRECAUTIONS.

  • Page 6: Specifications

    SPECIFICATIONS Dimensions Height: 2.60 inches Width: 14.17 inches Depth: 11.54 inches Weight: 6.8 lbs. AC Power: AC 120V, 60Hz Power Consumption Operating Conditions Temperature: 32 to 122 degrees Fahrenheit (0 to 40 degrees Celsius) Humidity: 95% non-condensing Altitude: 7500 feet above sea level maximum RF Input Frequency Range: 50 to 800 MHz (Broadcast CH 2-69, Cable STD/IRC/HRC)
  • Page 7 SECTION 2 CABINET & MAIN CHASSIS CONTENTS EXPLODED VIEWS ........................2-2 1. Cabinet and Main Frame Section ...................2-2 2. Packing Accessory Section ....................2-3...

  • Page 8: Cabinet And Main Frame Section

    EXPLODED VIEWS 1. Cabinet and Main Frame Section NOTES) THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN SERVICE LITERATURE.

  • Page 9: Packing Accessory Section

    2. Packing Accessory Section 827 CABLE COAXIAL REMOCON 826 FILTER(CIRC) 823 DVI CABLE INSTRUCTION ASSEMBLY 822 D-SUB(RS23) PACKING (LF) PACKING (RF) BOX CARTON 300 POWER COARD...

  • Page 10: Table Of Contents

    SECTION 3 ELECTRICAL CONTENTS ELECTRICAL TROUBLESHOOTING GUIDE ....................3-2 1. Power(SMPS) CIRCUIT ...........................3-2 2. CPU(SYSTEM CONTROL) TROUBLESHOOTING................3-4 3. ATSC/QAM FRONT_END TROUBLESHOOTING.................3-12 4. NTSC/FRONT_END TROUBLESHOOTING..................3-14 5. FPGA TROUBLESHOOTING ........................3-15 6. VIDEO TROUBLESHOOTING .......................3-16 7. AUDIO TROUBLESHOOTING .......................3-29 BLOCK DIAGRAM ............................3-38 1. OVERALL BLOCK DIAGRAM .......................3-38 2.

  • Page 11: Electrical Troubleshooting Guide

    ELECTRICAL TROUBLESHOOTING GUIDE 1. Power(SMPS) CIRCUIT No 3.8VA Is the F101 Replace the FR101 Normal? (Use the same ICW) Is the BD101 Replace the Normal? BD101 Is the R107 Replace the R107 Normal? Is Vcc (14V-22V) sup- Is the D102 Check or Replace plied to IC101 Pin3? normal?
  • Page 12 No 5VA No 30VA Is there about 5.5V Check or Replace Is the ZD152 Replace the ZD152 at the IC153 pin1? the D124 Normal? (Use the same Value) Check or Replace Check or Replace the IC153 the D126 No 12VA Is there about 14V Check or Replace at the IC151 pin1?

  • Page 13: Cpu(System Control) Troubleshooting

    2. CPU(SYSTEM CONTROL) TROUBLESHOOTING Start Power is supplied normally? (A) Power check Clock signals are OK? (B) Clock check Reset signals are OK at the time of (C) Reset check power-on reset? Chip selection signals are OK? (D) CS check IIC channels are OK? (E) IIC check Interrupt signals are OK?
  • Page 14 (A) Power check Power Supply Check 2.5V is supplied to L101? IC954(3) : 2.5V 3.3V is supplied to IC104(37), IC105(37), Power Supply Check IC950(2) : 3.3V IC102(1), IC103(1), and IC201(3)? Power Supply Check 3.3V is supplied to IC106(14)? IC950(2) : 3.3V (B) Clock check 25MHz clock is output from X101(3)? Check X101...
  • Page 15 Fig.01 X101(3) : 25MHz CPU Clock Fig.03 X102(3) : 3.6864MHz UART Clock Fig.02 IC201(87) : 37.5MHz PERI Clock...
  • Page 16 (C) Reset check IC107(3) is reset? Check IC107 IC106(4) is reset? Fig.04 Check IC106 IC201(29, 56, 61, 64, 75) are reset? Check IC101 & 201 Fig.04 IC106(4) : Reset signal...
  • Page 17 (D) CS check Logic low pulse is seen at R138? Check IC101, 104, 105 Fig.05 Logic low pulse is seen at R140? Check IC101, IC211 Logic low pulse is seen at R144? Check IC101, IC400 Logic low pulse is seen at R143? Check IC101, IC201 Fig.05 R138(1) : Flash CS signal...
  • Page 18 (E) IIC check IIC SDA and SCL signals are output Check IC211 from IC211(19 & 18)? Fig.06 & Fig.07 IIC SCL and SDA signals are output Check IC101 from IC101(W17 & U15)? Fig.06 IC211(19) : 3.3V IIC SDA signal Fig.07 IC211(18) : 3.3V IIC SCL signal...
  • Page 19 (F) Interrupt check Logic high is input to IC101(D18) or R418? Check IC100, IC400 Logic high is input to IC101(W20) or Check IC100, CN201(7) CN201(7)? Fig.08 IC101(D18) : No Interrupt signal 3-10...
  • Page 20 (G) RS-232C check RS-232C port setup is OK? Modify RS-232C port setup (Baudrate, Parity, Data Bit, Stop Bit) IC204(10) is OK?(TxD signal) Check IC101, IC204 Fig.09 IC204(9) is OK?(RxD signal) Check IC101, IC204 Fig.10 Fig.09 IC204(10) : TxD signal Fig.10 IC204(9) : RxD signal 3-11...

  • Page 21: Atsc/Qam Front_End Troubleshooting

    3. ATSC/QAM FRONT_END TROUBLESHOOTING Start Check the power lines(A9V, D5V_2, Power is supplied normally(TU300)? D3.3V_2, P_30V_TU) referring the circuit diagram. RF signal is detected? Check antenna connection. (using Spectrum Analyzer) Check the Voltage between L303 and Check error signal(TU300(22)). (using Ground.
  • Page 22 FIG.03 TU300(36) VSB/QAM DATA Byte Clock FIG.02 TU300(27) VSB/QAM DATA Packet Clock FIG.01 TU300(28,29,30,31,32,33,34,35) VSB/QAM DATA Outputs 3-13...

  • Page 23: Ntsc/Front_End Troubleshooting

    4. NTSC/FRONT_END TROUBLESHOOTING Start Check the power lines(A9V, D5V_2, Power is supplied normally? D3.3V_2, P_30V_TU) referring the circuit diagram RF signal is detected? Check antenna connection. (using Spectrum Analyzer) What Voltage is between L303 and ground ? Change Q300. 5V : NO 1V( below) : YES Check NIM Tuner(TU300)’s output signal Change TU300.

  • Page 24: Fpga Troubleshooting

    5. FPGA TROUBLESHOOTING (1). NO ATSC AUDIO & VIDEO 1) Check IC801, IC960 and surroundings 3.3V is supplied to IC801?(Check C802) Check the Power Supply Part. 1.5V is supplied to IC801?(Check C812) Check IC960 and surroundings. 27MHz is output from X801? Check X801 Check the ATSC/QAM tuner part 3-15...

  • Page 25: Video Troubleshooting

    6. VIDEO TROUBLESHOOTING Start No HV sync OUT? What is the main picture source? Any problem in main picture? DTV or NTSC or RGB NTSC Any problem in AV out? (C1) (C2) (C2) 3-16...
  • Page 26 Check L400(1.8V), L401(3.3V) IC950(2) Power is supplied to IC400[HD2]? (3.3V). Video display clock(IC615(7)) is supplied Check X600 if there is sinusoidal 27MHz clock. FIG.02 to HD2? FIG.01 FIG.01 VDP clock FIG.02 Crystal 27MHz clock 3-17...
  • Page 27 (C2) When NTSC is main Check tuner output composite signal Check tuner block(TU300) (C615) FIG.05 power check: L602 5V Analog input: IC606 (44) Check NTSC decoder. Reference clock oscillation : X601 FIG.06 Pixel clock: 13.5MHz continuous Clock in IC606 (28). FIG.07 Hsync out: 15.7KHz negative pulse in IC606 (36).
  • Page 28 FIG.06 X601 Reference clock FIG.07 NTSC Decoder Pixel Clock FIG.08 NTSC Decoder Hsync output FIG.09 NTSC Decoder Vsync out- put(top), Field ID(bottom) 3-21...
  • Page 29 (C2) When RGB is main Check RGB cable is connected Connect RGB cable Check PC resolution Change resolution to 1024 x 768 Check H:CN203(2)(Fig.10 top). V : CN203(1) (FIG.10 middle), R:CN203(9), Check cable or video card G:CN203(5) ,B:CN204(4) (FIG,10 bottom) If the pin is high, check IC201(23) Check input selection is low : IC506(1) If IC203(23) is high then try power off/on.
  • Page 30 FIG.10 H,V and R,G,B signal FIG.12 ADC output h_sync(IC504(6600 FIG.11 ADC output clock(IC504(67)) FIG.13 ADC output v_sync(IC504(64)) FIG.14 ADC output digital data 3-23...
  • Page 31 Check Q501 base voltage. Check NTSC mute signal is low. Must be low. If not, check IC201 pin 47 Check NTSC encoder pixel clock: Check HD-II NTSC encoder part. IC605(13) FIG.15 Check power:IC604(8); +5V IC604(4) ; –5V Check NTSC analog output buffer part Check composite: FIG.16 top, Input: IC604(3,5) Output: IC604(1,7) 3-24...
  • Page 32 FIG.15 27MHz NTSC encoder pixel clock FIG.16 Composite Output(top) 3-25...

  • Page 33: Audio Troubleshooting

    7. AUDIO TROUBLESHOOTING (1) NO ATSC AUDIO 1) CHECK IC400 AND SURROUNDINGS Is FPGA Part OK? Go to FPGA Troubleshooting Flow(1) 1.8V & 3.3V are supplied to IC400? Check the Power Supply Part. Data is input from TU300 to IC400(A11, Check Tuner Part.
  • Page 34 Fig.01 Data output from R424 Fig.02 3.072MHz clock from FB401 Fig.03 48KHz clock from R421 3-30...
  • Page 35 5. NO ATSC AUDIO 2) CHECK MSP4448G AND SURROUNDINGS 5V is supplied to IC701(10, 16, 49, 63)? Check Power Supply Part 8V is supplied to IC701(31)? 12V is supplied to IC703(1)? 18.432MHz Clock is input to IC701(54, Check Power Supply Part 55)? Data pulse is input to IC701(6)? Check X701...
  • Page 36 6. AUDIO TROUBLESHOOTING 3) Check IC702 and Surroundings 9V is supplied to IC702(8)? Check Power Supply Part Analog audio signal is output from Check IC702 and surroundings IC702(1, 7)? 6. AUDIO TROUBLESHOOTING 4) Check Output Jack and Surroundings Check Q702, Q703, Q704, Q705, JA600 and their surroundings 3-32...
  • Page 37 6. AUDIO TROUBLESHOOTING (2) No NTSC Audio ATSC Audio is OK? Go back to symptom #1 SIF signal is input to the Base of Q302? Check TU300 SIF signal is input to IC701(50)? Fig.05 Check Q302 Analog audio signal is output from Check IC701 and surroundings.
  • Page 38 6. AUDIO TROUBLESHOOTING (3) No SPDIF Out for ATSC ATSC Audio is OK? Go back to symptom #1 SPDIF pulse is output from R423? Fig.06 Check IC400 and surroundings. SPDIF pulse is output from IC704(4)? Check IC704 and surroundings. 5V is supplied to JA701(2)? Check Power Supply Part.
  • Page 39 6. AUDIO TROUBLESHOOTING (4) No SPDIF Out for ATSC ATSC Audio is OK? Go back to symptom #1 ATSC SPDIF is OK? Go back to symptom #3 NTSC Audio is OK? Go back to symptom #2 Analog audio is output from IC701 Check IC701.
  • Page 40 6. AUDIO TROUBLESHOOTING (5) No External Audio Video is OK? Check External Video Input Audio is output form pin 6 and 8 of CN203 Check CN203 and surrounding 11 pin is connection Cable OK? Check 11 pin Connection Cable Junction Board(6870R3815HA) is OK? Check Junction Board(6870R3815HA) External A/V Test Card(IP card) is OK? Check External A/V Test Card...
  • Page 41 6. AUDIO TROUBLESHOOTING (6) No SPDIF for External Audio External Audio is OK? Go back to symptom $5 ATSC SPDIF is OK? Go back to symptom #3 Analog audio is input to IC701(35, 36)? Go back to symptom #6 18.432MHz clock is output from Check IC701.

  • Page 42: Block Diagram

    BLOCK DIAGRAM 1. OVERALL BLOCK DIAGRAM 3-38...

  • Page 43: Power Block Diagram

    2. POWER BLOCK DIAGRAM 3-39...

  • Page 44: Block Diagram

    3. BLOCK DIAGRAM UART0 3-40...

  • Page 46: Cpu Peri & Ir-In & Aux-Ctrl Circuit Diagram

    3. CPU PERI & IR-IN & AUX-CTRL CIRCUIT DIAGRAM 3-45 3-46...

  • Page 47: Terrestrial Front_End Circuit Diagram

    4. TERRESTRIAL FRONT_END CIRCUIT DIAGRAM 3-47 3-48...

  • Page 48: Hd2 & Sdram Circuit Diagram

    5. HD2 & SDRAM CIRCUIT DIAGRAM 3-49 3-50...

  • Page 49: Dvi Transmitter Circuit Diagram

    6. DVI TRANSMITTER CIRCUIT DIAGRAM 3-51 3-52...

  • Page 50: Vdp I/F & Display Output Circuit Diagram

    7. VDP I/F & DISPLAY OUTPUT CIRCUIT DIAGRAM 3-53 3-54...

  • Page 51: Ntsc Audio Processor Circuit Diagram

    8. NTSC AUDIO PROCESSOR CIRCUIT DIAGRAM 3-55 3-56...

  • Page 52: Power Regulation Circuit Diagram

    9. POWER REGULATION CIRCUIT DIAGRAM 3-57 3-58...

  • Page 53: Fpga For Decryoption Circuit Diagram

    10. FPGA FOR DECRYOPTION CIRCUIT DIAGRAM 3-59 3-60...

  • Page 54: Printed Circuit Diagrams

    PRINTED CIRCUIT DIAGRAMS 1. DIGITAL MAIN PRINTED CIRCUIT DIAGRAMS(TOP) 3-61 3-62...

  • Page 55: Digital Main Printed Circuit Diagrams(Bottom)

    2. DIGITAL MAIN PRINTED CIRCUIT DIAGRAMS(BOTTOM) 3-63 3-64...

  • Page 56: Mpi Printed Circuit Diagram(Top)

    3. MPI PRINTED CIRCUIT DIAGRAM (TOP VIEW) (BOTTOM VIEW) 3-65 3-66...

  • Page 57: Ptc Printed Circuit Diagram

    4. PTC PRINTED CIRCUIT DIAGRAM (TOP VIEW) (BOTTOM VIEW) 3-67 3-68...

  • Page 58: Back Plane Printed Circuit Diagram

    5. BACK PLANE PRINTED CIRCUIT DIAGRAM 6. POWER PRINTED CIRCUIT DIAGRAM (TOP VIEW) LOCATION GUIDE NOTES) Warning NOTES) Parts that are shaded are critical NOTES) With respect to risk of fire or NOTES) electricial shock. (BOTTOM VIEW) 3-69 3-70...
  • Page 60 1SZZR-0098H SCREW,DRAWING + 2 D3.0 L8.0 MSWR3/FZMCW-1 3 1SZZR-0098K SCREW,DRAWING + 2 D3.0 21MM MSWR3/FZMCY-1 3C 3835RB0002K INSTRUCTION ASSEMBLY SETTOP BOX LST-5600A-AA1ULL 3R 3890R-C120V LST-5600A AA1ULL SWW3-A STB 3920R-E109A PACKING SETTOP BOX LST-4600A 80 STB 3858R-S001A SHEET (MECH) Packing LDPE 600M 630MM 0.5 VC...
  • Page 61 L122 633-088D COIL,CHOKE 20UH KWANGSUNG LEAD CUT L123 633-088G COIL,CHOKE 22MH TOKO 5MM TP P101 561-715L CONNECTOR (CIRC),WAFER GIL-G-12P-S3T2-E LG CABLE 12PI P102 6631R-F010U CONNECTOR ASSEMBLY GIL-G-5P/GIL-J-5S 5P 80M/M L PW101 6630VM01502 CONNECTOR (CIRC),WAFER JE202-1-T-02(3-2)W JAE EUN 2P R100 0RD1504H632 RESISTOR,FIXED CARBON FILM 1.5M OHM 1/2 W 5.00% MF10...
  • Page 62 SVC681D-10A SAMHWA 4.O CUT ZD152 0DZ332609BA DIODE,ZENERS UZ-33BSB 26MM TP PYUNG CHANG D *** PWB(PCB) ASSEMBLY,TOTAL *** 6871R-3955A PWB(PCB) ASSEMBLY,TOTAL LST-5600A MAIN PCB TOTAL AR111 0RRZVTA001M RESISTOR,DRAWING 4.7K OHM 1 / 10 W 1608 4P 5% R AR111 0RRZVTA001J RESISTOR,DRAWING 4.7K OHM 1 / 16 W 3216 5% R/TP...
  • Page 63 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C231 0CH4331K412 CAPACITOR,FIXED CERAMIC(HIGH D 330PF 50V 5% NP0 1608 R/TP C234 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C235 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C236 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C...
  • Page 64 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C482 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C488 0CH8226F611 CAPACITOR,FIXED ELECTROLYTIC 22UF 16V 20% 85STD (CYL) R/TP C492 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C493 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP...
  • Page 65 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C665 0CH4470K412 CAPACITOR,FIXED CERAMIC(HIGH D 47PF 50V 5% NP0 1608 R/TP C701 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C702 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C704 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C...
  • Page 66 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C965 0CH8107F611 CAPACITOR,FIXED ELECTROLYTIC 100UF 16V 20% 85STD (CYL) R/TP C966 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C967 0CH8107F611 CAPACITOR,FIXED ELECTROLYTIC 100UF 16V 20% 85STD (CYL) R/TP C968 0CH7226F651 CAPACITOR,FIXED TANTALUM 22UF 16V 20% 6032 TP(-)
  • Page 67 IC213 0IMX232162A IC,MAXIM MAX232ACSE 16NARROW-SO RS232 - ALTERNATE IC301 0ISTLSG003A IC,STANDARD LOGIC M74HC4066RM13TR SGS-THOMSON 14 IC400 0ICTMLG009C IC,CUSTOMIZED LGDT1102C HD2.3 LG IC SBGA-432 IC404 0IMMRHY025A IC,MEMORIES HY57V643220CT-7 HYUNDAI 86P TS IC405 0IMMRHY025A IC,MEMORIES HY57V643220CT-7 HYUNDAI 86P TS IC500 0IPRPS2002A IC,PERIPHERALS...
  • Page 68 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS L605 6140RF0005X INDUCTOR,CHIP NLCV32T-6R8M-PF TDK R/TP L608 6140RF0005X INDUCTOR,CHIP NLCV32T-6R8M-PF TDK R/TP L701 635-009J INDUCTOR,DRAWING NLCV32T-220K-PF TDK R/TP L702 635-009J INDUCTOR,DRAWING NLCV32T-220K-PF TDK R/TP L703 635-009J INDUCTOR,DRAWING NLCV32T-220K-PF TDK R/TP L704 635-009N INDUCTOR,DRAWING CHIP 100UH NLC322522T-101K TDK...
  • Page 69 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS R181 0RH1001C622 RESISTOR,METAL GLAZED(CHIP) 1K OHM 1 / 16 W 1608 5.00% D R183 0RH1001C622 RESISTOR,METAL GLAZED(CHIP) 1K OHM 1 / 16 W 1608 5.00% D R184 0RH1001C622 RESISTOR,METAL GLAZED(CHIP) 1K OHM 1 / 16 W 1608 5.00% D R186 0RH1001C622 RESISTOR,METAL GLAZED(CHIP)
  • Page 70 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS R296 0RH2200C622 RESISTOR,METAL GLAZED(CHIP) 220 OHM 1 / 16 W 1608 5.00% D R297 0RH0272C622 RESISTOR,METAL GLAZED(CHIP) 27 OHM 1 / 16 W 1608 5.00% D R298 0RH2200C622 RESISTOR,METAL GLAZED(CHIP) 220 OHM 1 / 16 W 1608 5.00% D R299 0RH2201C622 RESISTOR,METAL GLAZED(CHIP)
  • Page 71 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS R574 0RH0222C622 RESISTOR,METAL GLAZED(CHIP) 22 OHM 1 / 16 W 1608 5.00% D R607 0RH0682C622 RESISTOR,METAL GLAZED(CHIP) 68 OHM 1 / 16 W 1608 5.00% D R616 0RH0682C622 RESISTOR,METAL GLAZED(CHIP) 68 OHM 1 / 16 W 1608 5.00% D R619 0RH4703C622 RESISTOR,METAL GLAZED(CHIP)
  • Page 72 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS R813 0RH0472C622 RESISTOR,METAL GLAZED(CHIP) 47 OHM 1 / 16 W 1608 5.00% D R814 0RH0000C622 RESISTOR,METAL GLAZED(CHIP) 0 OHM 1 / 16 W 1608 5.00% D R815 0RH0000C622 RESISTOR,METAL GLAZED(CHIP) 0 OHM 1 / 16 W 1608 5.00% D R951 0RH1502C622 RESISTOR,METAL GLAZED(CHIP)
  • Page 73 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C1400 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C141 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C142 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C143 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP...
  • Page 74 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C421 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C422 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C423 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C424 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP...
  • Page 75 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C501 0CH1102K562 CAPACITOR,FIXED CERAMIC(TEMP.C 1000PF 50V 10% X7R(X) 1608 R/T C502 0CH1102K562 CAPACITOR,FIXED CERAMIC(TEMP.C 1000PF 50V 10% X7R(X) 1608 R/T C503 0CH1102K562 CAPACITOR,FIXED CERAMIC(TEMP.C 1000PF 50V 10% X7R(X) 1608 R/T C507 0CH1102K562 CAPACITOR,FIXED CERAMIC(TEMP.C 1000PF 50V 10% X7R(X) 1608 R/T...
  • Page 76 S AL LOCA. NO. PART NO. DESCRIPTION SPECIFICATION REMARKS C943 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C951 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C952 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP C959 0CH1104K512 CAPACITOR,FIXED CERAMIC(TEMP.C 0.1UF 50V 10% B(5YP) 1608 R/TP...
  • Page 77 220UF KME TYPE 50V 20% FL TP 5 ALTERNATE CN201 6631R-F010S CONNECTOR ASSEMBLY GIL-G-08P/GIL-J-08S 8P 80M/M L CN202 561-715F CONNECTOR (CIRC),WAFER GIL-G-06P-S3T2-E LG CABLE 6PIN CN203 561-715K CONNECTOR (CIRC),WAFER GIL-G-11P-S3T2-E LG CABLE 11PI CN950 561-715L CONNECTOR (CIRC),WAFER GIL-G-12P-S3T2-E LG CABLE 12PI...
  • Page 78 6204A42500C OSCILLATOR BXO-210 BUBANG 25MHZ +/- 50 PP X102 6204A43686C OSCILLATOR BXO-210 BUBANG/CHUNGHO 3.6864M IC104.5A 6957R-3955A PROGRAM LST-5600A PPV-II MAIN PROGRAM *** BOARD ASSEMBLY *** 3501R-3813A BOARD ASSEMBLY SETTOP BOX LST-5600A PROTOCOL, A48A 6871R-3813A PWB(PCB) ASSEMBLY,TOTAL LST-5600A MPI CARD C100...
  • Page 79 4.7K OHM 1 / 16 W 1608 5.00% D X200 6204B47372Z OSCILLATOR VCXO CHUNGHO/SOUTH STAR 7.3728 A48C 6874RB3815A HAND INS PWB(PCB) ASSEMBLY LST-5600A BACK PLANE CN300 561-716K CONNECTOR (CIRC),WAFER GIL-G-11P-S3L2-E LG CABLE 11PI CN301 6630BL01611 CONNECTOR (CIRC),BOARD TO BOAR 11JQ-BT JST 11P 2.5MM...
  • Page 80 4 D3/8"-16 NO RULE BSP/BN,BSW/ 1SZZR-0097K SCREW,DRAWING + 2 D3.0 L10.0 MSWR3/FZB 3 CR 1SZZR-0098G SCREW,DRAWING + 2 D3.0 L8.0 MSWR3/FZMCW-1 3C A48E 4811R-0265A BRACKET ASSEMBLY SETTOP BOX LST-5600A 4930R-0500A HOLDER VCR GUIDE RAIL(LST-4600A) MOLD 4810R-0307A BRACKET SETTOP BOX LST-5600A PRESS...

Table of Contents