Select a menu display language
Note
•
If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically
to the same OSD menu language as per your TV setting (if the language set on TV is supported by
this product).
1
In the Home menu, select [Settings] and press OK.
2
Select [Preference Setup], then press .
3
Select [Menu Language], then press .
Video Setup
Audio Setup
Preference Setup
EasyLink Setup
Advanced Setup
•
The language options may vary from different regions.
4
Press
to select a language, then press OK.
Use Philips EasyLink
This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control to control EasyLink-compliant devices that are
connected through HDMI connectors.
Note
•
To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other
devices connected to TV. Refer to the TVs/devices manual for details.
One-touch play
1
Press the STANDBY button to turn on this product.
Menu Language
Parental Control
Screen Saver
Change Password
Display Panel
Auto Standby
VCD PBC