Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sharp AQUOS LC-32Z33H
Summary of Contents for Sharp AQUOS LC-32Z33H
- Page 1 LC-32Z33H LC-37Z33H 液晶彩色電視機 LCD COLOUR TELEVISION 使用說明書 OPERATION MANUAL...
-
Page 2: Table Of Contents
OPERATION MANUAL ENGLISH Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. - Page 3 Contents Watching TV (Continued) Reducing the start-up time ................25 Password setting for the child lock (for TV input mode) ........ 26 Energy conservation settings ................... 27 Auto power-off at a designated time ............. 27 Auto power-off after the end of broadcast ............ 27 Auto power-off when there are no operations performed ......
-
Page 4: Important Safety Precautions
Use a damp cloth to break when the product is struck clean the product. Do not use liquid forcefully or with a sharp object. If cleaners or aerosol cleaners. the LCD panel is broken, be careful not to be injured by broken glass. -
Page 5: Supplied Accessories
Supplied accessories Make sure the following accessories are provided with the product. “AAA” size battery ( g 2) Remote control unit AC cord Always use the AC cord supplied with Used with batteries inserted. the TV. Page 8 Page 12 Page 9 Cable clamp Stand unit... -
Page 6: Preparation
Preparation Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. -
Page 7: Part Names
Preparation Part names TV (Front) TV/VIDEO button Channel up ( r )/down ( s ) buttons MENU button Volume up ( e )/down ( f ) buttons POWER (On/Off) button Remote control sensor OPC indicator* OPC sensor SLEEP timer indicator POWER indicator** *OPC: Optical Picture Control (See page 32.) ** See page 13 for the TV status indicator. -
Page 8: Tv (Rear)
Preparation TV (Rear) AC INPUT terminal INPUT 3 (HDMI) terminals INPUT 4 (HDMI) terminal RS-232C terminal INPUT 5 (PC Input) terminals Headphone jack INPUT 1 terminals MONITOR OUTPUT terminals Antenna input terminal INPUT 2 terminals Regarding the headphone jack • Use headphones with a stereo mini plug (Ø 3.5 mm). Volume display when headphones are plugged in •... -
Page 9: Remote Control Unit
Preparation Remote control unit POWER (STANDBY/ON) To switch the power on and off. (See page 13.) 0 – 9 Set the channel. (See page 18.) A (Flashback) TV/VIDEO (INPUT SOURCE) Press to return to the previous Select an input source. (TV, selected channel or external INPUT 1, INPUT 2, INPUT 3, input mode. -
Page 10: Before Turning On The Power
Preparation Before turning on the power Notes on installing the TV • Avoid direct sunlight and place the TV in a well-ventilated location. • Place the TV in a level location. • Do not turn on the power of the TV before connecting the AC cord. Connecting the antenna cable To enjoy a clearer picture, use an outdoor antenna. -
Page 11: Connecting External Devices
Preparation Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV Decoder (Set Top Box) and PC. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV. -
Page 12: Connecting A Digital Tv Decoder (Set Top Box)
Preparation Connecting a Digital TV Decoder (Set Top Box) You can use the INPUT 1/INPUT 2 or INPUT 3/INPUT 4 (HDMI) terminals when connecting to a Digital TV Decoder (Set Top Box) and other audiovisual equipment. • When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 36.) When using HDMI-certifi... -
Page 13: Inserting The Batteries
Preparation Inserting the batteries Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert the two supplied “AAA”... -
Page 14: Turning The Tv On/Off
Preparation Turning the TV on/off Turning on the power Turning off the power Press POWER on the TV. POWER button • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control. -
Page 15: About Menu Operations
Preparation About Menu operations H Using the control panel of the TV What is Menu? You can also operate the Menu using the control panel • You need to bring up the On-Screen Display to perform of the TV. settings for the TV. The On-Screen Display for the settings Button operations on the control panel correspond to is called “Menu”. -
Page 16: Tv/Av Input Mode Menu Items
Preparation TV/AV input mode menu items List of TV/AV menu items to help you with operations Picture Setup Auto Installation ............Page 17 AV Mode ..............Page 31 Programme Setup ..........Pages 19-22 OPC ................Page 32 Child Lock ..............Page 26 Backlight .............. -
Page 17: Pc Input Mode Menu Items
Preparation PC input mode menu items List of PC menu items to help you with operations Picture Setup Input Skip ..............Page 38 AV Mode ..............Page 31 Input Label ..............Page 38 OPC ................Page 32 Standby Mode ............Page 25 Backlight .............. -
Page 18: Watching Tv
Watching TV Setting channels automatically You can run auto installation again, even after setting If you have already set the password, enter it up the preset channels. here. • See page 26 for setting a password. Press a / b to select “Yes”, and then press ENTER. -
Page 19: Selecting Programmes
Watching TV Selecting programmes Adjusting the volume You can change channels in several ways. Using CH r / s on the remote control unit • Press CH r to increase the channel number. • Press CH s to decrease the channel number. Changing the volume You can change the volume on the TV or on the •... -
Page 20: Setting Channels To Your Preference
Watching TV Setting channels to your preference You can run the auto search procedure again at any time by accessing the Setup menu and Programme Setup. Channels can be tuned automatically or manually. Auto search Manual setting for each channel You can also automatically search by performing You can set some channel items manually. - Page 21 Watching TV Manual setting for each channel (continued) Search tuning Colour system Press a / b / c / d to select the channel you Press a / b / c / d to select the channel you want to edit, and then press ENTER. want to edit, and then press ENTER.
-
Page 22: Sorting Programmes
Watching TV Manual setting for each channel (continued) Sorting programmes Channel positions can be sorted freely. Skipping channels Channels with “Skip” set to “On” are passed over Press MENU and the MENU screen displays. when using CH r / s even if selected while watching the image from the TV. -
Page 23: Erasing Programmes
Watching TV Erasing programmes Labelling programmes The individual programme can be erased. Channels can be labelled freely. Press MENU and the MENU screen displays. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press c / d to select “Setup”. Press a / b to select “Programme Setup”, and Press a / b to select “Programme Setup”, and then press ENTER. -
Page 24: Useful Viewing Functions
Watching TV Useful viewing functions Picture and still image You can freeze a motion picture on the Display. Press FREEZE. • A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE. -
Page 25: Returning To The Previously Selected Channel Or External Input Mode
Watching TV Returning to the previously selected Outputting only audio channel or external input mode When listening to music from a music programme, you can set the display off and enjoy audio only. Press MENU and the MENU screen displays. Press c / d to select “Option”. -
Page 26: Switching The Analogue Audio Format
Watching TV Switching the analogue audio format You can switch between multiple audio modes When receiving a bilingual signal Each time you press MPX, the mode switches among when watching a multiple audio or stereo broadcast programme. CH A, CH B and CH AB. Bilingual mode In the NICAM TV broadcasts When receiving a stereo signal... -
Page 27: Password Setting For The Child Lock (For Tv Input Mode)
Watching TV Password setting for the child lock (for TV input mode) Allows you to use a password to protect certain Setting a channel settings from being accidentally changed. Repeat steps 1 to 4 in Setting a password. Press a / b to select “Channel Setting”, and then press ENTER. -
Page 28: Energy Conservation Settings
Watching TV Energy conservation settings Auto power-off at a designated time Auto power-off after the end of broadcast This function is conveniently used when, for instance, You can set the TV to automatically power off in about going to bed while watching TV. 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day. -
Page 29: Power Management
Watching TV Power Management Ecology When set to “Yes”, the TV activates the following You can set the TV to automatically power off when no power saving mode. image is displayed on PC. • “OPC” set to “On” (Page 32) •... -
Page 30: Picture Size Settings
Watching TV Picture size settings Selecting the Wide Screen Signalling Selecting the Wide Screen Signalling (WSS) picture size automatically (WSS) picture size manually WSS allows a television to switch automatically among The WSS signal has 4:3 auto-switching that allows you the different screen formats. -
Page 31: Selecting The Picture Size Manually (For Tv/Av Input Mode)
Watching TV Selecting the picture size manually (for TV/AV Input mode) Manual Selection Auto Selection You can select different picture sizes that account for If you set “WSS” and “4:3 Mode” in the Setup menu the kind of each picture. on page 29, the optimum WIDE mode is automatically chosen for every broadcast containing the WSS information. -
Page 32: Selecting A Preset Av Mode
Watching TV Selecting a preset AV MODE The AV MODE function enables you to select Selected item Description appropriate settings for audio and video to account for the system environment which can vary due to factors STANDARD For a highly defi ned image in a normally like room brightness, type of programme watched or bright room the type of image input from external equipment. -
Page 33: Manual Picture Settings
Watching TV Manual picture settings H OPC (Optical Picture Control) setting Picture adjustment You can set the TV to automatically adjust the screen You can adjust the picture to your preference. to suitable backlight brightness according to the Follow the steps to adjust the picture. lighting conditions. -
Page 34: Advanced Picture Settings
Watching TV Advanced picture settings The advanced settings enable you to set the picture H Black adjustment in more detail. There are fi ve options you For easier viewing, change the viewing depth by can choose from. selecting a level for automatically adjusting the dark portion of an image. -
Page 35: Other Picture Settings
Watching TV Other picture settings Game Play Time DNR (Digital Noise Reduction) This function displays the elapsed game time so you Reduces noise on the screen and produces a clearer do not lose track of the time. video image. To display the elapsed time, select “GAME” under “AV Press MENU and the MENU screen displays. -
Page 36: Audio Adjustment
Watching TV Audio adjustment You can adjust the audio of the selected AV mode. Output Volume Select Press MENU and the MENU screen displays. Allows you to select what controls the audio output. Press MENU and the MENU screen displays. Press c / d to select “Audio”. -
Page 37: Settings When Using External Devices
Settings when using external devices Settings when using HDMI output devices HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output the audio and picture from an HDMI output device on the TV, select “INPUT3” or “INPUT4” by switching the input source. -
Page 38: Selecting The Input Source And Signal Type
Settings when using external devices Selecting the input source and signal type Selecting input source Selecting input signal type Can use for selecting the input source. For setting the signal type of external equipment. Using TV/VIDEO on the remote control unit or on Press MENU and the MENU screen displays. -
Page 39: Labelling Input Sources
Settings when using external devices Labelling input sources Skipping HDMI/PC input You can assign each input source a label as you This setting allows you to skip the HDMI or PC input prefer. on the Input Selection Operation. Press MENU and the MENU screen displays. Press c / d to select “Setup”. -
Page 40: Connecting A Pc
Connecting a PC Use the PC terminals to connect a PC. • The PC INPUT terminals are DDC1/2B-compatible. • Refer to page 44 for a list of PC signals compatible with the TV. ANALOG RGB cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) AUDIO... -
Page 41: Selecting The Picture Size
Connecting a PC Selecting the picture size You can select the picture size as illustrated below. • Connect the PC before making adjustments. • Selectable picture size may vary with input signal type. Connecting a PC ANALOG RGB cable (commercially available) Ø... -
Page 42: Adjusting The Pc Image Automatically
Connecting a PC Adjusting the PC image automatically Adjusting the PC image manually This function enables the screen to be automatically Ordinarily you can easily adjust the picture as adjusted to its best possible condition when the necessary to change image position using Auto Sync. analogue terminals of the TV and PC are connected In some cases, however, manual adjustment is needed with a commercially available RGB cable, etc. -
Page 43: Input Resolution Settings
Connecting a PC Input resolution settings Selecting the input resolution • Some input signals may have to be registered manually to display properly. • The pairs of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. -
Page 44: Pc Control Of The Tv
Connecting a PC PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. -
Page 45: Pc Compatibility Chart (Input 5)
Connecting a PC PC compatibility chart ( INPUT 5 ) Horizontal Vertical VESA Horizontal Vertical VESA Resolution Resolution Frequency Frequency Standard Frequency Frequency Standard ✓ 720 g 400 1024 g 768 31.5 kHz 70 Hz 48.4 kHz 60 Hz ✓ ✓... -
Page 46: Appendix
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • Check if you pressed POWER on the remote control unit. (See page 13.) If the indicator on the TV lights up red, press POWER. -
Page 47: Reset
Appendix Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Reset”, and then press ENTER. -
Page 48: Specifi Cations
0°C — 40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. There may be some deviations from these values in individual units. -
Page 49: Dimensional Drawings
Appendix Dimensional drawings Unit: mm • Figures within parentheses are for LC-37Z33H. -
Page 50: Mounting The Tv On The Wall
• For details, refer to the instructions supplied with the optional bracket. CAUTION • This TV should be mounted on the wall only with the AN-37AG5 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries. -
Page 51: Clearing The Password
Appendix CLEARING THE PASSWORD If you forget your password, set a new password using the following procedure. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Child Lock”, and then press ENTER. The password input screen displays. - Page 52 Printed in Malaysia 馬來西亞印刷 TINS-E051WJZZ 08P12-MA-NP...