Adjusting The Viewfinder Focus And Screen; Using The Bkw-401 Viewfinder Rotation Bracket - Sony PMW-350K Operating Instructions Manual

Adjusting the Viewfinder Focus
and Screen
To adjust the viewfinder focus
Turn the diopter adjustment ring until the
viewfinder image is sharpest.
Diopter adjustment ring
You can also attach a commercially available
protection filter, close-up lens, etc. that is 52 mm
in diameter.
To adjust the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below.
1 PEAKING control
2 CONTRAST control
3 BRIGHT control
Using the BKW-401 Viewfinder
Rotation Bracket
By fitting an optional BKW-401 Viewfinder
Rotation Bracket, you can rotate the viewfinder
out of the way so that your right leg does not hit
the viewfinder while you are carrying the
camcorder.
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
Viewfinder slide assembly
3
Attach the BKW-401 with the supplied
bolts.
Bolts supplied with the BKW-401
Attaching the Viewfinder
Bolts with
hexagonal
hole
35