LG GDK-186 User Manual page 46

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
In case of using
part does not answer the call within a default time (4 sec.).
In case of using
part does not answer the call within a programmed time. The programming is done at an
admin station. The admin programming code is "43 + flex24". The time range is 4 to 40
seconds.
To delete the greetion:
Press button.
Press
To play back the greeting:
Press button.
Press
The greeting message will be heard.
Station status prompt:
Press button.
Press
A user will hear below items, (a-h). (c-g) items will not be heard unless they are activated.
Station number XXXX
a)
Listed message X
b)
c) Wake-up time XXXX AM or PM
Do not disturb
d)
Forwarded to station XXXX
e)
Forwarded to speed bin XXX
f)
Locked (temporary COS change)
g)
COS X
h)
To record a paging message:
Press button.
Press
To stop recording, press
Caution: 1. pressing
2.This feature should be programmed at the attendant station before using.
, a caller will hear the greeting message when the called
, a caller will hear the greeting message when the called
(for no answer FWD) or
(for no answer FWD) or
.
, then record a paging message.
or HOLD (
one more time, erase the recorded message.
４０
(for busy FWD).
(for busy FWD).
) button longer than 1 second.