Appendix B Leds - HP 425 Installation Manual

Appendix B LEDs

Table 3 LED description
Mark Color Status
Flashing at 1 Hz
Green
Slowly pulsing
Flashing at 0.25 Hz
Blue
Flashing at 2 Hz
Slowly pulsing
Steady on
Orange Flashing at 1 Hz
Flashing at 2 Hz
Alternating green Slowly pulsing green
and blue and blue alternately
20
Description
The AP is booting.
NOTE:
When the AP operates as a fit AP, it is
always in this state before it is
registered to an AC.
A client is connected to the 2.4G port.
The AP has been booted and has
registered to the AC. It is in standby
state (no client is connected to the AP).
The AP is updating its system software
image.
A client is connected to the 5G port.
An initialization exception has
occurred to the AP.
The AP cannot detect any radio
interface.
An Ethernet port or radio interface is
operating incorrectly.
Clients are connected to both the
2.4G and 5G radio interfaces.