Siemens M35 Series Service Manual page 33

This executable file needs a definition or init file, named SWUP.INI, to define the message
language preferences and the hardware communication port set up.
The content of this file consists of the following text:
Language=English
COM=x
Where x is the number that corresponds to the serial port that is used, either 1, 2 or 3.
Flow chart 2.1 illustrates the software programming process.
Plug in the Boot
Adaptor to the
PC and Mobile
Connect the AC
adaptor to the
Boot Adaptor
Power up Boot
Adaptor &
Check LED
OK
?
No
Check AC
Adaptor
Yes
OK
?
No
Faulty AC
Adaptor
Faulty Boot
Adaptor
FLOWCHART 2.1 SOFTWARE PROGRAMMING. PROCESS
Power up the PC
in DOS
environment
Execute the
"Mobile S/W"
Error
?
Yes
Yes
Check
H/W setup = S/W
settings.
OK
?
No
Correct settings.
Software
upgrading in
progress
Yes Error
?
No
Test Mobile
Take note of
error and repeat
process again
Yes
Feedback Error
to ICP CD ASC
END
No