Table of Contents
Advertisement
14. SOFT SW
This menu is used to switch the function settings on P.C.B.
through the software so as to activate the product.
The protection function follows the P.C.B. settings. When
connected to AC or in the maker preset state, the unit is
initialized to the P.C. B. setting. Display of each function
after initialization varies depending on settings on P.C.B.
The operation mode can be changed by selecting the sub-
menu and then using the EFFECT key. With SOF selected
for the SW mode, the settings become effective.
SW MODE: PCB or SOFT can be selected.
MODEL SETTING: V440, V540, AX640, V640 or V740
can be selected.
TUNER DESTINATION: J, UC, ALG or R can be selected.
RDS: NOT or EXIST can be selected.
ZONE2: NOT or EXIST can be selected.
VIDEO FORMAT: NTSC or PAL can be selected.
(J model only)
RX-V540/RX-V540RDS/HTR-5650/HTR-5650RDS/DSP-AX540
RX-V440/RX-V440RDS/HTR-5640/HTR-5640RDS/DSP-AX440
41
Hide quick links:
Advertisement
Table of Contents
