Using A Usb Wireless Lan Module; Attaching The Ifu-Wlm3 - Sony PMW-F55 Operating Instructions Manual

Solid-state memory camcorder
Hide thumbs Also See for PMW-F55:
Table of Contents

Advertisement

To update the managerial file
If clips cannot be played back, updating the
managerial file on the card may improve the
situation. For this operation, use "Update Media"
(page 85) of the Media menu.
Using a USB Wireless
LAN Module
You can make the Wi-Fi connection between the
camcorder and a device such as a smartphone,
tablet, etc., by attaching the supplied IFU-WLM3
USB wireless LAN module.
Note
• The IFU-WLM3 USB Wireless LAN Module
(supplied) may not be available in some countries/
regions.
• Attach/remove the IFU-WLM3 after the camcorder is
turned off.
• If you use a wireless device near the camcorder, the
camcorder may not work correctly. Turn the wireless
device off near the camcorder.
• You cannot use a USB wireless LAN module other
than the IFU-WLM3.
Making a Wi-Fi connection between a device and
the camcorder enables you to do the following.
• Operate the setup menu
• Record and playback the camcorder
• Display the current status of the camcorder
• Switch between the recording settings and
system settings
• Operate the assignable buttons of the camcorder

Attaching the IFU-WLM3

1
Open the cover of the USB wireless
LAN module retracting part (page 13).
2
Insert the IFU-WLM3 to the USB
connector.
3
Close the cover.

Using a USB Wireless LAN Module

35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmw-f5

Table of Contents