SET0502000
5.2 Procedure for Adding HDD / SSD
SET0502010
5.2.1 Checking the delivered items
(1) Check the delivered items by confirming the following.
1. The types and quantities of delivered options match those written on the order sheet.
2. The delivered items match those listed in the List of Accessories.
3. All cabinets are free of any abnormalities such as scratches, dents, or dirt.
4. The specifications and version level of units delivered separately due to delivery considerations
are available for the target functions.
SET0502020
5.2.2 Mounting the adding options
Use the following steps to mount the added options.
ANNT) Confirm the quantities and installation locations with a system administrator.
ANNT) If you start the work with the main unit powered off, turn on the AC power and mount the added
options.
(1) Connect the FST. See Appendix B.2.1, "FST Setup and Connection (APP0202010)".
(2) Login to the Web-UI.
Table 5.2.2 lists the values to be set to log in to Web-UI.
See Appendix B.3.1, "Login (APP0203010)".
Item
URL
Username
Password
(3) Enter Maintenance Mode.
See Appendix B.1.1, "Enabling maintenance Mode (APP0201010)".
(4) Confirm the numbers and mounting locations of the options.
(5) Remove the dummy hard disk drive unit, and install the HDD / SSD unit.
See Appendix C.7, " Internal Hard Disk Drive (HDD) / Internal Solid State Drive (SSD)
(APP0307000)".
(6) Confirm that the Alarm LEDs are not on.
(7) Change Maintenance Mode disabled. See Appendix B.1.2," Disabling maintenance mode
(APP0201020)".
Table 5.2.2
Setting values
http://<Maintenance IP Address>:<http port#> or
https://<Maintenance IP Address>:<https port#>
This depends on the system configuration.
http port#:Default(8081)
https port#:Default(432)
Account username
Account password
32
CA92344-0577-01