GE GEK-36150 terminet 300 Operator's Manual page 25

GEK-36150
CONDITION OF
INTERRUPT LAMP
Unlit
Lit
CONDITION OF
INTERRUPT LAMP
Unlit
Lit
TABLE3-1
INTERRUPT CONDITION TABLE
RESULTS FROM PRESSING
INTERRUPT PUSHBUTTON
An
11
lnterrupt
11
or
11
Break
11
signal is transmitted.
INTERRUPT lamp does not light.
1. INTERRUPT lamp goes out.
2.
11
lnterrupt
11
or
11
Break
11
is not transmitted.
3. KEYBOARD is unlocked (KSR Printer).
4.
READY lamp is restored to normal.
RESULTS FROM RECEIVING
AN INTERRUPT SIGNAL
1. INTERRUPT lamp lights.
2.
Alarm sounds.
3. Keyboard is locked out (KSR Printer).
4.
Optional Reader (if on) is turned off.
5.
Optional Reader may then be restarted
either locally or remotely.
6.
Data may still be received.
7.
Motor does not turn off.
8. READY lamp is held off.
1. Optional Reader (if on) is turned off.
2.
Optional Reader may then be restarted
either locally or remotely.
3. Data may still be received.
4.
Motor is not turned off.
5.
READY lamp is held off.
NOTE
Operation
An
11
INTERRUPT
11
or
11
Break
11
signal transmitted by a TermiNet Printer is always 268 milliseconds long. (It is a
constant zero (spacing) condition.)
The minimum duration of a received
11
INTERRUPT
11
or
11
Break
11
signal must be 240 milliseconds to insure detection
by a TermiNet Printer.
3-3