Signing Off The Cooktop - Miele KM 6322 Operating And Installation Instructions

Signing off the cooktop

If you want to sign off from the Miele{home system, first
prepare the signing-off procedure on the master appliance
(see the "Miele|home" fitting and installation instructions).
^ With the cooktop switched off, touch the s and $ sensors
at the same time until the safety lock indicator light
flashes.
After selecting the programming mode, P (Programme) and S
(Status) will appear in the timer display. On cooktops with 3
cooking zones, an additional indicator will appear at the rear
left.
^ Touch the sensor for selecting the front left cooking zone
and then touch the 1 on the numerical keypad (Set
Programme 10).
^ Touch the sensor for selecting the front right cooking zone
and then touch the 1 on the numerical keypad (Set Status 1
= Signed off).
The signing-off process starts, and the number 1 flashes. The
signing-off process will take a few minutes. The number 1 will
light up constantly when the process has been completed
successfully.
^ To save the setting, touch the s sensor until all the
displays go out.
^ Proceed as described in the "Miele|home" or Con|ctivity
fitting and installation instructions.
Con|ctivity and Miele|home
59