Removing And Reinstalling The Main Parts; Tape Mechanism Section; How To Remove The Record/Playback And Erase Heads; How To Remove The Playback Head - Sharp CD-BK1600V Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION

Perform steps 1, 2, 3, 4, 5, 7, 8 and 10 of the disassembly
method to remove the tape mechanism.
How to remove the record/playback and erase
heads (Tape 2) (See Fig. 11-1)
1. Carefully remove the record/playback head and erase head
screws (A1) x 2 pcs.
How to remove the playback head (Tape 1)
(See Fig. 11-2)
1. Carefully remove the playback head screws (B1) x 2 pcs.
How to remove the pinch roller (Tape 1/2)
(See Fig. 11-3)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (C1) x 1 pc., in the
direction of the arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (Tape 2) (See Fig. 11-4)
1. Remove the main belt (D1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (D2) x 1 pc.
How to remove the belt (Tape 1) (See Fig. 11-4)
1. Remove the main belt (E1) x 1 pc., from the motor side.
2. Remove the FF/REW belt (E2) x 1 pc.
How to remove the motor (See Fig. 11-5)
1. Remove the screws (F1) x 2 pcs., to remove the motor.
(F1) x2
Ø2.6x5mm
Figure 11-5
Motor
TAPE 2
– 11 –
CD-BK1600V/1800V/190V
TAPE 2
Erase Head
(A1)x2
Ø2 x 6mm
Figure 11-1
(B1)x1
Ø2x9mm
(B1)x1
Ø2x5mm
Figure 11-2
Pinch Roller
(C1)x1
Pull
<B>
Figure 11-3
Motor
FF/REW
Belt
(D2)x1
Main Belt
(D1)x1
Main Belt
(E1)x1
Figure 11-4
Record/Playback
Head
TAPE 1
Playback
Head
Pinch
Roller
Pawl
Pull
<A>
Motor
TAPE 1
Main Belt
TAPE 2
(E1)x1
Main Belt
(D1)x1
TAPE 1
FF/REW
Belt
(E2)x1