Function Button - Sony HT-6500DP Operating Instructions Manual

To reset a button to its factory
setting
Repeat the above procedure.
If the factory settings of the FUNCTION
buttons do not match your system components,
you can change them. For example, if you have
a tape deck and you do not have an MD deck,
you can assign the MD/TAPE button to your
tape deck.
To reset all the function buttons to
their factory setting
Press I/b, AV I/b and MASTER VOL - at
the same time.
Note that the settings of the TUNER button
cannot be changed.
1
Hold down the Function button whose
function you want to change (for
example, MD/TAPE).
2 Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 -Tape
deck).
The following buttons are assigned to select
the functions:
To operate Press
CD player I
DAT deck 2
MD deck 3
Tape deck A
4
Tape deck B
5
LD player 6
tiCR (command mode VTR I ') 7
VCR (command mode VTR 2") 8
VCR (command mode VTR 3") 9
TV 0
DSS (Digital Satellite Receiver)
DVD
>I0
ENTER
c Sony VCRs are operated wtth a VTR I. 2 or 3
\etttng. The\e cot-re\pond to Beta. 8mn1 and
VHS rc\pccti\cly.
Now you can use the MD/TAPE button to
control the tape deck.
47us