Display - Miele TKB 440 WP Operating Instructions Manual

Display

g Time display
The programme duration remaining
will be displayed in hours : minutes.
The duration displayed for the Cot‐
tons, Minimum iron, Delicates, Ex‐
press, Denim, Gentle smoothing
programmes may vary or "jump".
The following factors, among others,
affect the programme duration dis‐
played: the quantity of laundry, the
type of fabric and the residual mois‐
ture in the laundry. The electronics
continually assess conditions in the
appliance and then adjust the pro‐
gramme duration with increasing ac‐
curacy.
h Check/fault indicators
These are only visible when neces‐
sary.
 ...
... empty the condensed water con‐
tainer or check the drain hose
 ...
... clean the plinth filter/airways
 ...
... technical fault, call the Service
Department
Operating the tumble dryer
i Drying level display
For selecting the drying level for pro‐
grammes with a selectable drying
level. See "  sensor".
j  sensor
This sensor has two functions.
Touching the symbol will . . .
. . . select a later start time for the
programme (delay start).  will
flash during selection,  will light
up constantly when the delay start
time is counting down.
. . . select the duration of the Warm
air programme.  will flash during
selection.
k Perfect Dry indicator
With programmes with a selectable
drying level, the Perfect Dry system
calculates the residual moisture
present in the laundry to ensure a
precise drying result.
The Perfect Dry indicator . . .
. . . will flash after the programme
has started and go out when the
programme duration appears in the
display.
. . . will light up again when the se‐
lected drying level is reached and
remain on until the end of the pro‐
gramme.
. . . will remain dark with the follow‐
ing programmes: Woollens hand‐
care, Silks handcare, Warm air.
l  sensor
Touching this symbol will select the
drying level required which will then
light up .
17