Installing The Hard Drive; Removing The Heatsink - Dell OptiPlex 3020M Owner's Manual

Installing the Hard Drive

1. Insert the hard drive into the hard-drive bracket.
2. Align and place the hard-drive assembly to its slot on the computer.
3. Install the cover.
4. Follow the procedures in

Removing the Heatsink

1. Follow the procedures in
2. Remove the:
a. cover
b. processor fan module
3. Perform the following steps as shown in the illustration:
a. Remove the screws that secure the heatsink to the system board [1].
b. Lift the heatsink away from the system board [2].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
29