Operation - Pioneer DDJ-WEGO3 Operating Instructions Manual

Operation

Connections
For the connection procedure, see "Connections" in Operating Instructions (DJ unit Setup).
1 Connect this unit to your computer via a USB cable.
2 Turn on the computer's power.
Cautions for people using Windows
When you connect this unit to a computer for the first time or connect it to a different USB terminal, the [Installing device driver software] alert may
appear. If it appears, wait until the installation finishes. At that time, the [Device driver software was not successfully installed] alert will appear,
but there will be no influence on the operation of this unit so proceed to the next step.
! If you click the alert, you can confirm details on the alert.
The installation is successful if the device driver software other than [iAP Interface] is installed correctly.
3 Press the [STANDBY/ON] button on the unit to turn on the power.
After the startup illumination ends, the unit is ready for use.
Starting the system
 Launching Serato DJ Intro
For detailed instructions on operating the Serato DJ Intro software, see the Serato DJ Intro software manual.
For Windows 7
From the Windows [Start] menu, click the [Serato DJ Intro] icon under [All Programs] > [Serato] > [DJ Intro].
For Windows 8
From [Apps view], click the [Serato DJ Intro] icon.
For Mac OS X
In Finder, open the [Applications] folder, then click the [Serato DJ Intro] icon.
Computer screen directly after the Serato DJ Intro software is launched
A
C
Computer screen when a track is loaded in the Serato DJ Intro software
A B A
C
12
En