Cisco C880 M4 Operating Manual page 34

Insert the sliding rails in the rack. Compress the sliding rail to its length.
Figure 23: Right side sliding rail (2 rails for 2 enclosures, front side rack)
Figure 24: Left side sliding rail (2 rails for 2 enclosures, rear side rack)
Place the screws in the appropriate holes of the support bracket or support upright at the marked
attachment points and screw the sliding rails tight at the 19" profiles on the front / at the 19" profile and
the bracket on the rear.
34 Operating Manual
8.3Installing the Storage Subsystem in the Rack