JVC MX-GT98V Service Manual page 9

Removing the main board
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly, the rear panel and the antenna board.
1. Disconnect the card wires from connector CN870,
CN871 and CN315 on the main board.
2. Disconnect the wires from connector CN704 and
CN706 on the amplifier board.
3. Remove the screw I attaching the main board on
the right side ofthe body.
4. Disconnect connector CN211 and CN212 on the
main board from the regulator board.
Removing the speaker board
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the rear panel.
REFERENCE: It is not necessary to remove the main
board.
1. Disconnect connector CN217 on the speaker board
from the regulator board.
(See Fig.17 and 18)
(See Fig.19)
MX-GT98V/MX-GT95V/MX-GT88V
MX-GT85V/MX-G78V/MX-G75V
Main board
CN870
CN871
CN315
Amplifier board
CN704
CN706
Fig.17
Front panel assembly
Regulator board
Fig.18
Regulator board
Fig.19
Front panel assembly
Main board
CN211
I
CN212
Speaker board
CN217
1-9