Adding Titles To The Data - Sony SRW-5100 Operation Manual

4
Press the [F8] (DIRECTION) button to select the ,
direction.
The right cursor bar flashes.
5
Use the cursor T button to move the cursor (B) to the
CUE POINT SET side, then press the cursor R or r
button to move the cursor bar to the number of the
memory bank in the "Memory Stick."
Saved data
6
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
7
Press the [F9] (COPY) button while holding down the
SFT button.
This unit recalls the cue point list in the "Memory
Stick."
After the recalling process is completed, the title of the
cue point list appears under the CURRENT CUE SET
indication.
8
Press the [F10] (EXIT) button.
The SET UP menu appears again.

4-1-6 Adding Titles to the Data

When storing data to a memory bank in a "Memory Stick"
or this unit, you can add a title to the data to make data
management easier.
1
Move the cursor (B) to the item to be titled.
2
Press the [F6] (EDIT TITLE) button to display the
CURRENT SETUP TITLE EDIT window.
This unit enters EDIT mode is entered, and the
window opens.
3
Press the cursor T or t button to select a letter.
4
Press the [F7] (SET LETTER) button or the cursor
center button.
The selected letter is entered.
4-1 Registering and Storing Menu Settings
43