Setting The Clock; Setting The Clock Through "Music; Using Your Player As An Alarm Clock; Sleep Timer Setting - LG CM9950 Owner's Manual

Setting the Clock

1. Turn the unit on.
2. Press and hold CLOCK.
3. Select time mode by pressing C/V on
the remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6. Press SET.
7. Select the minutes by pressing C/V on
the remote control.
8. Press SET.
Setting the Clock through
"Music Flow Bluetooth" App
Install "Music Flow Bluetooth" app on your Android
device. (Refer to page 28)
Your unit's clock will be automatically synchronized
with your device by activating Bluetooth
connection through "Music Flow Bluetooth" app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM.
3. Press C/V on the remote control to
change the hours and minutes and press SET to
save.
4. Press C/V on the remote control to
select function and press SET to save.
- Press C/V on the remote control to
select a memory No. when you select Tuner
and then, press SET.
If there is no memory No., this step is skipped.
5. Press C/V on the remote control to
change the volume and press SET to save. The
clock icon "(" shows that the alarm is set.
,
Note
y If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
y You can set alarm after you set the clock
time.
y If you set the clock time and alarm, you
can check the alarm icon "(" by pressing
CLOCK even when the unit is turned off.
y If you set the clock time and alarm, you
can check the alarm icon "(" and setting
informaiton by pressing ALARM even when
the unit is turned off.
y You can select ALARM ON/OFF mode by
pressing ALARM.

Sleep Timer Setting

Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
the unit will be turned off.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
y You can check the remaining time before
the unit is turned off.
y Press SLEEP. The remaining time appears in
the display window.

Dimmer

Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim off.
,
Note
y All the LED turns off when Dimmer is being
operated.
Operating 37
3