LG G Vista Getting Started

Setting Up Your Phone
Welcome to Verizon Wireless. You're now part
of a growing movement that' s about speed,
signal and strength. This guide will show you
how to set up and use your phone, access
special features, and find help.
Get to Know
Step 1. Remove the Back Cover
Insert your fingernail into the slot located on

Your Phone

the lower left of the back cover and lift the
cover up gently.
Optional: Replace the SIM Card
The SIM card is pre-installed in your phone. If
you need to replace your SIM card, locate the
slot for the SIM card (the lower of two slots
under the back cover) and gently slide the SIM
card out to remove it.
Optional: Insert the microSD Card Step 3. Replace the Back Cover
If you have a microSD card, slide it into the Place the back cover over the back of the
microSD card slot, with the gold contact phone, and then press down along the edges
facing downwards, (the upper of the two to secure the cover.
slots under the back cover).
NOTE: The microSD card is sold separately.
Step 4. Charge the Phone
Your phone comes with a USB/Charger
Adapter and a USB cable that connect
together to charge your phone. Before turning
Step 2. Insert the Battery
on your phone, charge it fully.
Insert the battery, making sure to align the
WARNING! Please use only an approved charging accessory
gold contacts. Press down gently to secure to charge your phone. Improper handling of the USB/
Charger Port, as well as the use of an incompatible charger,
the battery.
may cause damage to your device and void the warranty.
LED Earpiece Proximity Laser Detection Rear
Indicator Sensor Auto-focus Camera
Front
Camera
Power/
Lock
Key
NFC
Touch
Point
Back Recent
Key Apps Key
Speaker USB/Charger Port
Microphone Home Key
microSD
Card Slot
NOTE: Devices and software are constantly evolving—the
screen images and icons you see here are for reference
only.
SIM Card Slot
Using Your Phone
Turning Your Phone On/Off 2. Swipe in any direction to unlock it.
OR
To turn your phone on, press and hold
To use a shortcut, swipe the shortcut
the Power/Lock Key for a couple of
icon at the bottom of the screen in any
seconds until the screen lights up.
direction. The screen will unlock and open
To turn your phone off, press and hold
the app.
the Power/Lock Key until the Phone
Unlocking the Screen Using the Knock
LED
options are displayed. Tap Power off
Flash Code Feature
> OK.
You can unlock the screen when the screen is
Setup Wizard off by tapping the correct area and sequence.
Volume Follow the onscreen instructions to quickly set
1. > > From the Home screen,
Keys
up your phone and email accounts.
tap: Apps > Settings > Lock screen.
Tap Select screen lock > Knock Code.
2.
Turning the Screen On
3. Follow the instructions to create your
Turning the Screen On Using the Power/
unlock sequence, as well as a backup PIN
Lock Key
in case you forget your unlock sequence.
To turn the screen on, press the Power/Lock
Key once and the screen will light up. Selecting the Home Screen Mode
You can select one of the two modes: Home
Turning the Screen On Using the KnockOn
and EasyHome. When you first turn on your
Feature
phone it will be set to Home mode and the
Quickly double-tap the center of the screen to
instructions in this guide are written based on
turn the screen on.
the Home mode.
Unlocking the Screen
> > From the Home screen, tap:
Using the Power/Lock Key Apps > Settings > Home screen > Select Home.
Press the Power/Lock Key to turn on
1.
Home mode — Standard experience for users
your screen. Your Lock screen will
who are familiar with Android. If selected, your
appear.
Home screen will look like this:
EasyHome mode — Simplified and easier
experience for the first time smartphone
user. If selected, your Home screen will look
like this: