Incoming Call Ringing Patterns - Toshiba Strata DK User Manual

Features
Before You Begin
To Flash the hookswitch
While on a call, flash
(press) the
hookswitch down
about 1/2 second,
then release it.
Some CO line features, such as conferencing, Centrex, or behind PBX operation require
"flashing the CO line," to dial Centrex/PBX feature access code or extension numbers.
To flash a CO line
1. Momentarily press
the hookswitch for
about 1/2 second.
2. Press
3. You can now dial a
Centrex or PBX
feature access code or
extension number.

Incoming Call Ringing Patterns

Your telephone ringing pattern is set in system programming.
Some systems may use the internal call ring pattern—one second ON, three seconds
OFF—for incoming outside calls.
A distinct outside call ring pattern—0.4 seconds ON, 0.2 seconds OFF, 0.4 seconds ON,
three seconds OFF—is available.
2
You hear dial tone after flashing the hookswitch. Some
telephones may have a special button which flashes the
hookswitch.
Note
After you press the hookswitch, You hear dial tone. This
hookflashes the Toshiba system only.

. You hear Centrex or PBX dial tone.
The hookswitch is located in the handset cradle of
your telephone.
Strata DK Standard Telephone 5/99